How to enter radio code discovery 2?

Amazingly, how do I put the code in for my radio? Turn your vehicle and car radio on. The word “Code” or “Locked” may appear. Enter your serial code using the numbered stereo buttons. For example, if your code is 24367, enter the numbers “2-4-3-6-7” using the numbered buttons on your stereo system or touch screen.

Additionally, how do I reset my Land Rover Discovery radio?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

Also, how do I unlock my Land Rover radio code? To find the serial number required to unlock the Land Rover radio, you will need to remove the radio from the dashboard using a set of Land Rover Radio Release Keys. Once you have removed the radio, you will be able to locate the unique serial number.

Moreover, how do I unlock my car radio?

Press the “Hour” button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the “Mode” button to lock in the code you set. Turn the stereo deck on by pressing the “Source” or “Power” button to complete the reset.

How do I reset my car radio after I change the battery?

To do this, You have to turn your ignition to the ON position. Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes.

How do I enter the radio code on a Land Rover Freelander?

Press either the up or down tunning button until the first digit of the code appears in the display. Press pre-set 1 to store the first digit in the memory. Use either tunning button to select the second digit of the code [until the correct digit appears].

How do you reset a Range Rover?

1. Go to Settings menu.
2. Select “Backup & Reset”, select “Factory data reset”
3. Select “Reset phone” and “Erase everything”
4. The device will then reboot.

How do I reset my discovery 3 radio?

In brief, to start the hard reset process, open the hood but close all doors and let your 3 go to sleep – no radio display etc and no key in the ignition. This will take a couple of minutes and do not open any doors until the reset is completed.

What is the Land Rover Bluetooth code?

Select Land Rover from the list. 3. Now enter the Bluetooth PIN 2121 into the mobile phone. The phone will pair and dock to the vehicle system.

What are the radio ten codes?

1. 10-1 Receiving Poorly.
2. 10-2 Receiving Well.
3. 10-3 Stop Transmitting.
4. 10-4 Acknowledgement.
5. 10-5 Relay.
6. 10-6 Busy.
7. 10-7 Out of Service.
8. 10-8 In Service.

How do I unlock my radio without the code?

Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.

Why is my radio locked?

A lockout code protects against radio theft. If a thief disconnects the radio, the code locks the radio up, rendering it useless. However, it’s not much of a safeguard because the thief usually doesn’t know that the code has been tripped until he powers up the radio after he has removed it from the vehicle.

Where do I find my radio ID number?

Press the SAT button on your radio and the Radio ID will display. On the Control display, select Radio, then Satellite Radio, and then Category. Select any channel and the Call Center number and Radio ID will display.

Why does my car radio say code?

The radio should still say “CODE” — that simply means the security system kicked on because it lost power from your battery.