Inspect the brake light switch on the brake pedal (the brake light switch has four wires on it and the cruise switch has two wires and a vacuum line on it). If switch is intact jump the green/purple wire and the green/orange wire; the brake lights should come on enabling the shift out of park.
Beside above, how do I get my Land Rover out of park? Turn the locking mechanism 90° anti-clockwise. Press the brake pedal. Use the strap to pull the transmission park release mechanism upwards, until it latches in the vertical position.
Similarly, how do I get my Discovery 4 out of park?
Amazingly, how do you put a 2017 Land Rover Discovery in neutral?
Considering this, how do I put my Discovery 4 in neutral?
Only tow the vehicle in a forward direction with all four wheels on the ground. Towing in a reverse direction or with only two wheels on the ground, can cause serious damage to the transmission. Do not tow the vehicle for more than 30 miles (50 km). Do not exceed 30 mph (50 km/h).Contents
How do you release the parking brake on a Range Rover?
How do you release the electronic handbrake on a Land Rover Discovery?
How do I get my Discovery 3 out of park?
How do you put a 2012 Range Rover in neutral?
How do you put a 2016 Land Rover Discovery in neutral?
How do I get my 2019 Land Rover into neutral?
How do you put a 2018 Land Rover in neutral?
How do you put a 2015 Land Rover in neutral?
How do you release an electronic handbrake with a flat battery?
With the AUTO switch OFF, the EPB can be applied by pushing and holding the parking brake switch. This will work with the ignition switch ON or OFF and with the vehicle moving or stationary. To release the brake, pull and hold the manual switch while at the same time pressing the brake pedal.