In this regard, how do you reset the radio on a Land Rover Discovery?
- To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
- The device will power down and then automatically reboot.
- Device will now power on, perform and charge as expected.
Furthermore, how do I enter the radio code on a Land Rover Freelander? Press either the up or down tunning button until the first digit of the code appears in the display. Press pre-set 1 to store the first digit in the memory. Use either tunning button to select the second digit of the code [until the correct digit appears].
Beside above, how do I open my radio code?
- Check Your Owner’s Manual. The best place to locate a radio code is in the owner’s manual of your car.
- Visit the Manufacturer’s Website.
- Visit your Local Dealership.
- Contact a Local Automotive Audio Installation Center.
Similarly, how do I reset the code on my car radio? Press the “Hour” button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the “Mode” button to lock in the code you set. Turn the stereo deck on by pressing the “Source” or “Power” button to complete the reset.
Contents
How do I reset my discovery 3 radio?
In brief, to start the hard reset process, open the hood but close all doors and let your 3 go to sleep – no radio display etc and no key in the ignition. This will take a couple of minutes and do not open any doors until the reset is completed.
What is the Land Rover Bluetooth code?
Select Land Rover from the list. 3. Now enter the Bluetooth PIN 2121 into the mobile phone. The phone will pair and dock to the vehicle system.
How do you remove a radio from a Landrover Freelander?
How do I unlock my radio without the code?
Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.
Can I get radio code from VIN number?
The code is located on a card that comes with the original purchase of the vehicle, which we don’t have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle and ask for the radio code.
Why is my car radio asking for a code?
Every time the battery is disconnected or becomes completely dead the radio will ask for the code. In most cases, you can just press and hold the power button for 2 seconds and the radio will automatically reset and start working properly without entering the code.
How do I reset my radio after changing the battery?
To do this, You have to turn your ignition to the ON position. Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes.
How do you take theft lock off radio?
- Use an original key (not a copied one) and insert it into the ignition.
- Turn the key into the “On” position.
- Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off.
- Flip the key into the “Off” position and leave it there for five seconds.
How do you fix a radio after replacing the battery?
The most common reason for a car radio to stop working after the battery has gone completely dead is that the radio has an anti-theft “feature” that kicks in whenever battery power is removed. When that happens, all you have to do is enter the right car radio code, and you’re back in business.