In brief, to start the hard reset process, open the hood but close all doors and let your 3 go to sleep – no radio display etc and no key in the ignition. This will take a couple of minutes and do not open any doors until the reset is completed.
Also the question Is, how do I reset the battery on my Discovery 4?
- Vehicle should be in sleep mode.
- Remove old battery.
- Install a new battery, charge it completely before.
- Switch on ignition, start engine.
- Program the new battery type with a diagnostic device (e.g. IID tool)
- Perform a BMS reset with a diagnostic device.
- Reprogram time, radio station etc.
Considering this, how do you reset a Land Rover Discovery computer?
- To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
- The device will power down and then automatically reboot.
- Device will now power on, perform and charge as expected.
In this regard, how do you reset a Land Rover Discovery 3?
Furthermore, how do I change the battery in my discovery? Lift the cover off to reveal the battery compartment. Remove the old battery and, making sure the correct polarity is maintained, insert a replacement 3.3 volt, CR1/3N battery. Replace the cover and rotate it to lock. Avoid touching the new battery.
- use a code reader.
- disconnect the battery leads for a couple minutes.
- cycle the key on and off more than 40 times. Note, this one requires the problems to be fixed before it worksthe other 2 ways do not, although the codes will return in 2 trips, otherwise.
Contents
How do you reset a Land Rover LR3?
How do you reset service light indicator Land Rover LR3. Hold down the reset button on the dashboard to reset the LR3 trip counter. Keep holding the reset button down even after the trip counter has cleared. Turn the ignition key to the II position on the ignition.
How do you reset a Range Rover?
- Go to Settings menu.
- Select “Backup & Reset”, select “Factory data reset”
- Select “Reset phone” and “Erase everything”
- The device will then reboot.
How do you service a Land Rover Discovery 3?
How do you reset the steering angle sensor on a Discovery 3?
How do you reset the Range Rover Sport?
Set the Trip computer display to show the trip that you wish to reset, then press and hold the I button until the message Resetting trip is displayed. It is not possible to manually reset the Auto trip memory. This resets automatically each time the ignition is switched on.
Where is the battery in a Land Rover Discovery?
How do you open a Discovery 4 with a flat battery?
How do you change the battery in a Land Rover Discovery 5 key?
Step-by-Step Land Rover Key Fob Battery Replacement Push the button to the side of your key fob and pull out the emergency key blade. Use the emergency key blade to pry the smart key case open. Remove the old battery and insert a new CR2032 type battery with the positive side upward.
How do you reset the service light on a Discovery sport?
Turn the ignition key to the “ON” position without starting the engine, If your car has push-button start, press the “Start” button without touching the brake pedal. Open the driver’s door. Hold the accelerator and brake pedals all the way down until you see SERVICE RESETTING in the dash.