How to reset service indicator on land rover discovery 3?

Amazingly, how do you reset the service on a Land Rover Discovery 3?

In this regard, how do you reset the service reminder on a Land Rover Discovery? Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

Also know, how do you reset the oil light on a Land Rover LR3?

1. Hold down the reset button on the dashboard to reset the LR3 trip counter.
2. Turn the ignition key to the II position on the ignition.
3. Continue holding the reset button for five seconds until a new menu appears on the digital display.

Furthermore, how do you reset the oil life on a 2006 Land Rover LR3?

1. Put the key fob into its slot.
2. Press and hold the TRIP reset button.
3. Turn the ignition key to the “ON” position without starting the engine.
4. Keep press the TRIP button until SERVICE indicator start flashing and wait until it stop flashing.

How do you reset a Land Rover Discovery?

Turn the ignition key to the “ON” position without starting the engine, If your car has push-button start, press the “Start” button without touching the brake pedal. Open the driver’s door. Hold the accelerator and brake pedals all the way down until you see SERVICE RESETTING in the dash.

How do you reset the oil light on a 2007 Land Rover LR3?

1. Release the TRIP RESET button within 10 seconds of entering the reset mode, the information display will show “DIST” or “OIL”
2. Press the TRIP RESET button within 10 seconds of releasing it and hold for more than 5 seconds.

How do you reset the service light on a 2011 Range Rover?

How do you reset the service light on a 2008 Range Rover Sport?

How do you turn off the service light on a 2010 Range Rover Sport?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

How do you reset the oil light on a 2006 Range Rover Sport?

Press and hold the trip odometer button in the instrument cluster (left button), and turn the ignition key to the first position (KLR). Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “OIL SERVICE, or “INSPECTION”, with “reset”.

How do you reset the Range Rover Sport?

Set the Trip computer display to show the trip that you wish to reset, then press and hold the I button until the message Resetting trip is displayed. It is not possible to manually reset the Auto trip memory. This resets automatically each time the ignition is switched on.

What are the problems with Discovery 3?

1. Suspension bushes need replacement after 100-150K Miles.
2. Front lower control arms.
3. Front wheel bearings.
4. Tie rod ends worn.
5. Ball joints and toe links worn.
6. Brake pads.
7. Coolant adaptor.
8. Air Suspension Leaks.

Where is the pollen filter on a Discovery 3?

Where is the fuel filter on a Discovery 3 TDV6?