How to reset service light on land rover discovery?

Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

Also, how do you reset the service indicator on a Land Rover Discovery 3?

In this regard, how do you reset the oil light on a 2006 Land Rover?

Moreover, how do you reset the maintenance light on a 2016 Range Rover?

Considering this, how do you reset the lights on a Land Rover?

1. Turn off your vehicle and put on the proper safety gloves and glasses.
2. Locate your battery under the hood and find the negative terminal.
3. Use a wrench to loosen the negative terminal connector.
4. Carefully hold it to the side for 30 to 60 seconds.

How do you reset a Land Rover Discovery computer?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

How do you service a Land Rover Discovery 3?

How do you reset the oil light on a 2007 Land Rover LR3?

1. Release the TRIP RESET button within 10 seconds of entering the reset mode, the information display will show “DIST” or “OIL”
2. Press the TRIP RESET button within 10 seconds of releasing it and hold for more than 5 seconds.

How do you turn off the service light on a 2010 Range Rover Sport?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

How do you reset the service light on a Discovery sport?

Turn the ignition key to the “ON” position without starting the engine, If your car has push-button start, press the “Start” button without touching the brake pedal. Open the driver’s door. Hold the accelerator and brake pedals all the way down until you see SERVICE RESETTING in the dash.

How do you reset the service light on a 2006 Range Rover Sport?

How do you reset the service light on a 2008 Range Rover?

How do you reset the TPMS on a Discovery 4?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The tire pressure monitor reset button is typically located under the steering wheel. Refer to your vehicle’s owner’s manual if you’re unable to locate it.

How do you reset the service light on a 2014 Range Rover?

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service light on a 2015 Range Rover Sport?