How to reset service light on land rover discovery 4?

Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

Furthermore, how do you reset the service light on a 2011 Land Rover lr4?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

Similarly, how do you reset the oil light on a 2012 Land Rover lr4?

Beside above, how do you reset the service indicator on a Land Rover Discovery 3?

Considering this, how do you reset the service light on a Discovery sport? Turn the ignition key to the “ON” position without starting the engine, If your car has push-button start, press the “Start” button without touching the brake pedal. Open the driver’s door. Hold the accelerator and brake pedals all the way down until you see SERVICE RESETTING in the dash.

How do you reset a Discovery 4 computer?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

How do you reset the service light on a 2009 Range Rover?

How do you reset the service light on a 2009 Range Rover Sport?

How do you reset the service light or indicator on a Land Rover Freelander 2?

How do you reset the service light on a 2014 Range Rover Sport?

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service indicator on a Range Rover Evoque?

How do you reset the service light on a Range Rover Evoque?

How do you reset the oil light on a Land Rover Defender?

1. Turn the ignition key to the “ON” position without starting the engine.
2. Press and hold the accelerator and brake pedals all the way down until the Oil Indicator blinks.
3. When the Oil Indicator blinks, turn off the ignition.

How do you reset the oil light on a 2007 Land Rover LR3?

1. Release the TRIP RESET button within 10 seconds of entering the reset mode, the information display will show “DIST” or “OIL”
2. Press the TRIP RESET button within 10 seconds of releasing it and hold for more than 5 seconds.

How do you reset a LR3?

Turn the ignition key to the II position on the ignition. Continue holding the reset button for five seconds until a new menu appears on the digital display. Let go of the reset button and press the reset button again until the option rst appears.