How to turn off service engine soon light on land rover discovery?

1. Turn off your vehicle and put on the proper safety gloves and glasses.
2. Locate your battery under the hood and find the negative terminal.
3. Use a wrench to loosen the negative terminal connector.
4. Carefully hold it to the side for 30 to 60 seconds.

Similarly, how do I turn off engine service soon?

1. Turn the ignition switch to the on position but do not start the car.
2. Count seven seconds, depress the gas pedal and hold it down for 10 seconds or until the service engine soon light begins flashing.

Subsequently, how do you reset the service engine soon code? Cycle ignition switch to ON position and wait 1 minute, then start your vehicle. Check Engine Light or Service Engine Soon Light should be reset and turned OFF.

Beside above, how do you reset the service light on a Discovery sport? Turn the ignition key to the “ON” position without starting the engine, If your car has push-button start, press the “Start” button without touching the brake pedal. Open the driver’s door. Hold the accelerator and brake pedals all the way down until you see SERVICE RESETTING in the dash.

In this regard, why is my Land Rover engine light on? Land Rover Range Rover Check Engine Light Flashing Other common reasons for a Check Engine Light are damaged oxygen sensor, a malfunction with the fuel injection system, faulty head gasket, dirty mass airflow sensor, faulty emissions control part, or defective spark plugs to name a few.

How do you reset a Land Rover?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

Will disconnecting battery reset service engine soon light?

Leaving the battery disconnected for about 15 minutes will ensure the vehicle systems will completely reset when you reconnect the battery. … Disconnecting the battery will clear the error codes and reset the check engine light.

How do I clear my check engine light without a scanner?

Will service engine soon light reset itself?

Your vehicle’s check engine light will will reset by itself once the issue or problem has been repaired; this is true for most models. … If you are certain that you have resolved the issue that caused your check engine light to come on in the first place, then the light should reset itself after at least 20 cycles.

Can you turn off check engine light?

Another simple approach to get rid of the check engine light is to turn on and off the car three times. Insert the key in the ignition, turn the car on for a second, and turn it off for another second. … Once you turned your car on/off three times, the check engine light should go away by itself.

How long does it take for service engine soon light to go off?

So why is the light still on? Here’s something you probably don’t know: after clearing the car’s computer you will need to drive for about 50 to 100 miles. As you drive your car the computer will monitor all the sensors and register the results.

Can I drive with service engine soon light on?

That having been said, you can probably drive safely with the service engine soon light on, as long as it is on solid and not flashing. If the service engine light is flashing, you should pull over immediately and call for roadside service and have the vehicle towed to the mechanic.

How do you reset the service light on a Land Rover Discovery Sport 2017?

How do you reset the service light on a Land Rover Discovery 3?

How do you reset the service light on a Land Rover Discovery 2018?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.