You asked : how to change a land rover discovery smart key battery?

1. Push the button to the side of your key fob and pull out the emergency key blade.
2. Use the emergency key blade to pry the smart key case open.
3. Remove the old battery and insert a new CR2032 type battery with the positive side upward.

Also the question Is, how do you open a smart key battery?

Also, how do I change the battery in my discovery 3 KEY?

Additionally, do I have to reprogram my key fob when I change the battery? The key fob will need to be reprogrammed to the vehicle as when the battery was replaced in the key fob, the key was reset. This is why nothing is working with the key fob. After replacing the battery in the key fob remote, you will need to reprogram the remote to the vehicle.

Moreover, how do you change the battery in a 2011 Land Rover key fob?

How do you reset a Land Rover Discovery battery?

In brief, to start the hard reset process, open the hood but close all doors and let your 3 go to sleep – no radio display etc and no key in the ignition. This will take a couple of minutes and do not open any doors until the reset is completed.

How do I replace my car key battery?

1. Step 1: Find the notch to open the fob. This is the trickiest part because the notch may not be obvious.
2. Step 2: Use the screwdriver to pop it open.
3. Step 3: Identify the battery type.
4. Step 4: Replace the old battery with a new one.
5. Step 5: Snap the fob shut.

How do I change the battery in my keyless remote?

How do you take apart a Smart car key?

How do you unlock a Discovery 3 with a flat battery?

How do you change the battery in a Land Rover Discovery 2 key fob?

How do you change the battery in a 2014 Range Rover key fob?

Will disconnecting car battery reset key fob?

Disconnecting the battery for a short time may not do the trick because the car’s computer, or ECU, still has some current in it. Waiting for over 15 minutes after disconnecting the engine will help ensure the equipment is reset.

Can a dead car battery cause the key fob not to work?

While there are a few different reasons that a keyless entry remote might stop working, most of them are pretty easy to check yourself. The most common problem with these car key fobs is that the batteries just go dead over time, in which case replacing the battery should fix the problem.

What kind of battery is in a key fob?

Keyless Remote Battery The most common types are CR2025 and CR2032 3-Volt batteries. You can find the exact type in your vehicle’s owner’s manual, or by checking what kind the old key fob battery is after removing it. No matter which type you need, you can find a new key fob battery for your car at your local AutoZone.