People also ask, what is Range Rover service mode? The Service Mode and Transport Mode can be enabled and disabled by using the Land Rover InControl Remote Smartphone App, or via the InControl website. The service and transport mode actions prevent stolen vehicle tracking alerts being raised while the vehicle is being transported or serviced.
Also, how do you put a Range Rover velar into service mode? To put in Service mode: In the car with ignition in Position II, press the brake pedal three times and hold the pedal down. Push down on the EPB switch for 3-5 seconds. Go to the main fuse box in the engine bay and remove FL8 fuse 30A (pink Fuse) this will ensure that the EPB is not accidentally re-engaged.
Additionally, what is EPB service mode? The EPB system will fully apply and release the parking brake to guarantee sufficient air gap between the rear brake pads and brake disc. Whenever a technician is performing a repair on a power steering system component, the question is always whether or not there is a need to flush the entire system.
Also know, how do you change the rear brake pads on a Range Rover Evoque?
2015 Range Rover Evoque. Do not rely on the Electric Parking Brake (EPB) to operate correctly, if the brake warning lamp illuminates. … With the ignition switched on, press the brake pedal and press down on the EPB switch, to release the EPB. Pull the EPB switch up and release it, to apply the EPB.How do you release the park brake on a Range Rover Evoque?
How do you lift a Range Rover with air suspension?
Up button: Press and release to raise the suspension height. If a door is open, press and hold to raise the suspension height. The button’s LED indicator lamp illuminates during suspension height adjustment and extinguishes when complete. Down button: Press and release to lower the suspension height.
Where is the handbrake on a Range Rover Sport?
On Discovery 3 and 4 and Range Rover Sport 1 models the electronic park brake system comprises four main parts: the driver’s switch in the cab, the brake module mounted in the centre of the chassis infront of the spare wheel, the cables that run from the module to the wheel brakes to operate them, and the brakes …
Do Range Rovers have brake hold?
The brake hold functions act on all four wheels. Under the specified conditions, the brake hold functions apply the Electric Parking Brake (EPB) automatically on the rear wheels only.
How do you put an electronic parking brake in service mode?
What is EPB reset?
EPB Reset Resets the cable if the Emergency release cable has been activated. EPB Un-jam Allows the EPB to be un-jammed when the vehicle has entered a state where the brakes screech when applying the Parking Brake, the rear brakes squeak or rub when the vehicle is moving or there is evidence of shoe-drag.
How do you turn off parking brake in maintenance mode?
How do you turn off the service light on a Range Rover Evoque?
How long do brake pads last on a Range Rover Evoque?
Land Rover Range Rover Evoque brake pads usually last between 30,000 and 70,000 miles depending on your driving habits.