Subsequently, how do you reset the service light on a 2012 Range Rover Evoque?
Beside above, how do I access Range Rover service menu?
Amazingly, how do you reset the service light on a Range Rover Sport?
Furthermore, how do you reset the service light on a 2012 Range Rover Sport?
Contents
How do you reset the service light on a 2011 Range Rover Sport?
- Key on, engine OFF.
- Open door.
- Open bonnet (hood)
- Depress the accelerator pedal simultaneously for ten seconds, release.
- service interval is now reset.
How do you reset the service light on a 2014 Range Rover Sport?
- Open the bonnet.
- Turn the ignition key to the “ON” position without starting the engine.
- Open the driver’s door.
- Hold the accelerator and brake pedals all the way down.
- Turn the ignition OFF and start the engine to verify the indicator has been reset.
How do you put a Range Rover in service mode?
How do you get to the message center on a Range Rover?
What is HBA Sensitivity Range Rover?
The AHBA feature automatically selects and deselects high beam under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only active when the ambient light drops below a predetermined level. Auto high beam sensitivity can be adjusted via the Vehicle settings menu.
How do you reset the service light on a Range Rover?
Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.
How do you reset the service light on a 2015 Range Rover Sport?
How do you reset the service light on a 2009 Range Rover?
How do you reset a 2011 Range Rover?
- Press and hold the trip reset button.
- Turn the ignition switch on to the ignition position II (one position before starting engine).
- If the SII (Service Indicator Interval) function is enabled the information display will flash ‘SERVICE’ for 5 seconds and then display ‘SERVICE’ constantly.