Also know, how do you reset the service light on a 2015 Range Rover? Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.
Beside above, how do you reset the oil light on a 2016 Range Rover Evoque? Fully depress both the accelerator and brake pedals and hold for 10 seconds. 5. A ‘Service Reset’ message will appear on the instrument cluster.
Moreover, how do you reset a Range Rover Evoque?
- Go to Settings menu.
- Select “Backup & Reset”, select “Factory data reset”
- Select “Reset phone” and “Erase everything”
- The device will then reboot.
Additionally, how do you reset the service indicator on a Range Rover Evoque?
Contents
How do you reset the oil life on a 2014 Range Rover?
- Open the bonnet.
- Turn the ignition key to the “ON” position without starting the engine.
- Open the driver’s door.
- Hold the accelerator and brake pedals all the way down.
- Turn the ignition OFF and start the engine to verify the indicator has been reset.
How do you reset the oil light on a 2017 Evoque?
How do you reset the service light on a Range Rover Evoque 2018?
How do you clear the code on a Range Rover?
- use a code reader.
- disconnect the battery leads for a couple minutes.
- cycle the key on and off more than 40 times. Note, this one requires the problems to be fixed before it worksthe other 2 ways do not, although the codes will return in 2 trips, otherwise.
How do I get my Range Rover out of valet mode?
- From the Home menu screen, select Valet.
- Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
- Valet mode activated is displayed to indicate that a PIN has been accepted.
How do you reset a Land Rover computer?
To reset the trip computer values to zero, press and hold the ¡ button for 2 seconds. To reset the fuel consumption value, press and hold the button until the display clears. The distance, average speed and average fuel economy values for trip A and trip B can be reset.
How do you check the oil on a 2015 Range Rover?
- Switch on the ignition (do not start the engine). See SWITCHING ON THE IGNITION.
- Make sure Park (P) is selected.
- Select Service Menu or Vehicle Information via the Instrument panel menu (see INSTRUMENT PANEL MENU).
- Select Oil Level.
- Top up, as instructed.
How do you reset the service light on a 2012 Range Rover Evoque?
How do you reset the maintenance light on a 2013 Range Rover?
- Key on, engine OFF.
- Open door.
- Open bonnet (hood)
- Depress the accelerator pedal simultaneously for ten seconds, release.
- service interval is now reset.