How to reset service light on range rover evoque 2012?

Also, how do you reset the service indicator on a Range Rover Evoque? Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

Also know, how do you reset the service light on a Range Rover Evoque 2018?

People also ask, how do you reset the service light on a Range Rover? Press and hold the trip reset button. Turn the ignition switch on to the ignition position II (one position before starting engine). If the SII (Service Indicator Interval) function is enabled the information display will flash SERVICE for 5 seconds and then display SERVICE constantly.

Another frequent question is, how do you reset the service light on a 2012 Range Rover Sport?

1. Turn on the ignition without starting the engine. First, without pressing the brake press the START button to put it into accessory mode.
2. Go to the Main Menu.
3. Scroll down and select SERVICE MENU.
4. Highlight the last option.
5. Hold down the ▼ navigation button and the TRIP button.
6. Release the button.

How do you reset the service light on a 2013 Range Rover Sport?

1. Turn off the cars ignition.
2. Hold down the reset button on the dash board to zero the mileage.
3. Turn the cars ignition on, but do not start.
4. A menu will come up, like date/mileage.
5. Let go and then press the button again.
6. It will toggle through some options, then get to rst.

How do you put a Range Rover in service mode?

How do you reset the service light on a 2010 Range Rover?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

How do I reset my maintenance?

How do you reset the service light on a 2014 Range Rover Sport?

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service indicator on a Range Rover Sport?

How do you get to the service menu on a Range Rover Sport?

How do you reset a 2011 Range Rover?

1. Press and hold the trip reset button.
2. Turn the ignition switch on to the ignition position II (one position before starting engine).
3. If the SII (Service Indicator Interval) function is enabled the information display will flash ‘SERVICE’ for 5 seconds and then display ‘SERVICE’ constantly.

How do you reset a Range Rover Evoque?

1. Go to Settings menu.
2. Select “Backup & Reset”, select “Factory data reset”
3. Select “Reset phone” and “Erase everything”
4. The device will then reboot.

What does it mean when the service indicator light is on?

The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.