Likewise, how do you reset the service light on a Range Rover Evoque 2018?
Also, how do you reset the service light on a 2015 Range Rover Evoque?
Furthermore, how do you reset the service on a Range Rover? Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.
People also ask, how do you put a Range Rover in service mode?
Contents
How do you reset the service light on a 2014 Range Rover Sport?
- Open the bonnet.
- Turn the ignition key to the “ON” position without starting the engine.
- Open the driver’s door.
- Hold the accelerator and brake pedals all the way down.
- Turn the ignition OFF and start the engine to verify the indicator has been reset.
How do you reset the service light on a 2012 Range Rover Sport?
How do you reset the service light on a 2016 Range Rover?
- Key on, engine OFF.
- Open door.
- Open bonnet (hood)
- Depress the accelerator pedal simultaneously for ten seconds, release.
- service interval is now reset.
How do you reset the service light on a 2009 Range Rover?
How do you reset the service light on a 2008 Range Rover?
What is Range Rover service mode?
The Service Mode and Transport Mode can be enabled and disabled by using the Land Rover InControl Remote Smartphone App, or via the InControl website. The service and transport mode actions prevent stolen vehicle tracking alerts being raised while the vehicle is being transported or serviced.
Does the Range Rover Evoque have a handbrake?
2015 Range Rover Evoque. Do not rely on the Electric Parking Brake (EPB) to operate correctly, if the brake warning lamp illuminates. … With the ignition switched on, press the brake pedal and press down on the EPB switch, to release the EPB. Pull the EPB switch up and release it, to apply the EPB.
How do you release the handbrake on an Evoque?
With the ignition switched on, press the brake pedal and press down on the EPB switch. This will release the EPB. With the vehicle stationary, pull the EPB switch up and release it, to apply the EPB. The Parking brake warning lamp will illuminate to indicate that the EPB is applied.
How do I reset my Range Rover valet mode?
- From the Home menu screen, select Valet.
- Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
- Valet mode activated is displayed to indicate that a PIN has been accepted.