How to reset service reminder on range rover evoque?

Also, how do you reset the service indicator on a Range Rover Evoque?

Additionally, how do you reset the service light on a Range Rover Evoque 2018?

People also ask, how do you reset the oil light on a 2013 Range Rover Evoque?

1. Turn on the ignition without starting the engine. First, without pressing the brake press the START button to put it into accessory mode.
2. Go to the Main Menu.
3. Scroll down and select SERVICE MENU.
4. Highlight the last option.
5. Hold down the ▼ navigation button and the TRIP button.
6. Release the button.

Another frequent question is, how do I access Range Rover service menu?

The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.

How do you reset the service on a Range Rover?

Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

How do you put a Range Rover in service mode?

How do you reset the service light on a 2015 Range Rover?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

How do you reset a Range Rover Evoque?

1. Go to Settings menu.
2. Select “Backup & Reset”, select “Factory data reset”
3. Select “Reset phone” and “Erase everything”
4. The device will then reboot.

How do you reset the oil light on a 2014 Range Rover?

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service light on a 2011 Range Rover?

How do I reset my Range Rover valet mode?

1. From the Home menu screen, select Valet.
2. Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
3. Valet mode activated is displayed to indicate that a PIN has been accepted.

What is HBA Sensitivity Range Rover?

The AHBA feature automatically selects and deselects high beam under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only active when the ambient light drops below a predetermined level. Auto high beam sensitivity can be adjusted via the Vehicle settings menu.

How do you get to the message center on a Range Rover?

What is service reminder?

Service Reminder Lights come on to remind you when your car is due for service or when the car’s computer is detecting a problem. … When you see this light come on, you should take your car in for an inspection and/or service.