Range Rover Evoque

How to reset service required on range rover evoque?

Additionally, how do I turn off the service required on my Range Rover Evoque?

Also know, how do you reset the service light on a Range Rover Evoque? Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

People also ask, how do you reset the service light on a 2013 Range Rover Evoque?

Also, how do you reset the service required on a Land Rover Range Rover HSE 2010?

  1. Key on, engine OFF.
  2. Open door.
  3. Open bonnet (hood)
  4. Depress the accelerator pedal simultaneously for ten seconds, release.
  5. service interval is now reset.

Contents

How do I reset my maintenance?

What does it mean when the service indicator light is on?

The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.

How do you reset the service light on a 2011 Range Rover?

How do you reset the service indicator on a Range Rover Sport?

How do you reset the service light on a 2009 Range Rover?

How do you reset the service light on a 2014 Range Rover Sport?

  1. Open the bonnet.
  2. Turn the ignition key to the “ON” position without starting the engine.
  3. Open the driver’s door.
  4. Hold the accelerator and brake pedals all the way down.
  5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you put a Range Rover in service mode?

How do you get to the message center on a Range Rover?

What is HBA Sensitivity Range Rover?

The AHBA feature automatically selects and deselects high beam under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only active when the ambient light drops below a predetermined level. Auto high beam sensitivity can be adjusted via the Vehicle settings menu.

Why does my car say maintenance required after oil change?

What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

See also:   Best adblue for range rover evoque?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!