How to reset the service light on a range rover evoque 2017?

Furthermore, how do you reset a Range Rover Evoque?

1. Go to Settings menu.
2. Select “Backup & Reset”, select “Factory data reset”
3. Select “Reset phone” and “Erase everything”
4. The device will then reboot.

Also, how do you reset the service light on a 2015 Range Rover Evoque?

Also know, how do you reset the service light on a 2019 Evoque? Youtube video link: https://m.youtube.com/watch?v=LH543AsJ5aI

Likewise, how do you reset the service required on a Range Rover? Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

How do you reset the service light on a 2014 Range Rover Sport?

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service light on a Range Rover Sport?

How do you reset the service light on a 2012 Range Rover Sport?

How often should a Range Rover Evoque be serviced?

After the 60,000-mile mark, all Land Rover vehicles should be brought in every 15,000 miles for the recommended inspections above. They should also be brought in for regular oil changes, brake, and tire replacements.

How do I know when my Range Rover needs a service?

What does it mean when the service indicator light is on?

The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.

How do you reset the service light on a 2016 Range Rover?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

How do I reset my maintenance?

How do you put a Range Rover in service mode?

How do I reset my Range Rover valet mode?

1. From the Home menu screen, select Valet.
2. Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
3. Valet mode activated is displayed to indicate that a PIN has been accepted.