HDC icon: Touch and briefly hold to enable the HDC system. The instrument panel displays a confirmation message and illuminates the HDC warning lamp to confirm selection. Touch and briefly hold the icon again to disable the HDC system.
Also, where is HDC button on Evoque? The HDC button is located on the centre console. The speed limits for the HDC system are adjusted via the control buttons mounted on the right side of the steering wheel. Dependent on the vehicle’s specification, the HDC button also operates the All Terrain Progress Control (ATPC) system.
Additionally, how do I turn off Hill Descent Control? System Operation The hill descent control indicator light blinks if the switch is ON and all operating conditions are not met or if the system becomes disengaged for any reason. To turn OFF the hill descent control system, push the switch to the OFF position.
Furthermore, what is HDC Range Rover Evoque? Land Rovers feature the HDC, which stands for Hill Descent Control system. … When the HDC is turned on, the vehicle will use the anti-lock braking system during descent to control the speed of each wheel on the vehicle. The driver can use cruise control to adjust the speed to a level that is comfortable.
Another frequent question is, what is HDC fault Land Rover? A message that says “HDC System Not Available” means that your HDC system is failing. … Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.
- Press to switch HDC on and off.
- Press to increase the set speed.
- Press to decrease the set speed.
Contents
How does Hill Descent Control Work Land Rover?
Hill Descent Control reduces the wasted braking potential by changing braking pressure to each wheel, which means each is then braked to its traction limit. The driver sets a descent speed, and the computers take care of the rest. The speed of the car is calculated from averaging the speeds of each of the four wheels.
What is the difference between Hill Assist and hill descent control?
Hill Descent Control can be used when navigating steep inclines, particularly in rough terrain, which can put your vehicle at risk. Hill Start Assist is useful in any situation where you’re stopped on a hill, particularly so in bumper to bumper traffic, or driving a steep driveway or ramp.
Why is my hill assist light on?
WARNING When the Hill start assist warning light illuminates, have the vehicle inspected at an authorized SUBARU dealer. While the Hill start assist system is deactivated, the Hill start assist OFF indicator light illuminates continuously to inform the driver that the Hill start assist system is not operational.
Does Hill need Descent Control?
Hill Descent Control helps your vehicle maintain a set speed as you drive downhill on an incline. … This is especially useful for off-road driving, where the ground can be uneven, and gaining speed on a slope can be dangerous.
What does gearbox fault mean on a Range Rover?
The gearbox fault message is often triggered by insufficient battery voltage. It’s a strange sort of Land Rover code – you know, gearbox fault REALLY means battery bad.
How many driver selectable modes are available with all terrain progress control?
Off-road, the Evoque is better than ever as the new model can wade through water up to 600mm deep (100mm more than the previous iteration) and features Land Rover’s Terrain Response2 selectable driving modes. You can choose from four modes: Comfort, Sand, Grass-Gravel-Snow and Mud & Ruts.
How do you turn a Land Rover HDC off?
HDC icon: Touch and briefly hold to enable the HDC system. The instrument panel displays a confirmation message and illuminates the HDC warning lamp to confirm selection. Touch and briefly hold the icon again to disable the HDC system.
How do I reset my Range Rover?
- To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
- The device will power down and then automatically reboot.
- Device will now power on, perform and charge as expected.
How do I turn off ATPC?
Press and release the ATPC button again to disable the system. The button’s LED lamp and the ATPC warning lamp extinguish to confirm. The message center also displays an ATPC off confirmation message. ATPC operation is influenced by the current terrain response driving program selection.
What is DSC Land Rover?
DSC Failure in a Land Rover Your vehicle’s DSC system, which stands for the Dynamic Stability Control system, is designed to correct and helps to counteract oversteer, understeer, and a variety of other undesirable inputs to your vehicle’s handling characteristics.