Likewise, what does it mean when your Range Rover says suspension fault? If the fault becomes active when the suspension is at “normal” height, the suspension is locked, preventing it from raising or lowering with a warning message “Normal Height Only”. If the suspension is lowered when the fault becomes active, it fails to raise and the warning message to not exceed 35 MPH is shown.
Also know, how do you reset suspension height on a Range Rover? Selecting a new height using the raise/lower switch 1, or driving off will reset the system. If the vehicle is grounded and traction control is activated, Extended mode is activated automatically to raise the vehicle clear.
Also, can you drive a Range Rover with suspension fault? Owning a Land Rover with Air Suspension is a smooth and comfortable ride until this Suspension Fault message appears. … This message does mean the electronic air suspension has stored a suspension fault but you can still drive normally on the freeway and surface streets.
People ask also, how do you reset an air suspension inactive Range Rover?
Contents
How do you reset the air suspension on a Range Rover P38?
Range Rover P38 EAS Reset Tool Just plug it in and within 30 seconds any soft faults logged in the EAS ECU will be read and reset. The tool uses the dashboard display to inform you of the progress (MAX 35MPH -> EAS MANUAL -> Faults and Display cleared.
How do you unlock suspension on a Range Rover?
See ELECTRONIC AIR SUSPENSION CONTROLS. The locked access height indicator lamp illuminates on the suspension system controls. The instrument panel displays a confirmation message. To manually cancel locked access height, press the up button (1) for longer than 1 second.
How do you turn off air suspension on a Range Rover?
If a door is open, press and hold to raise the suspension height. The button’s LED indicator lamp illuminates during suspension height adjustment and extinguishes when complete. Down button: Press and release to lower the suspension height. If a door is open, press and hold to lower the suspension height.
How do you jack up a Range Rover with air suspension?
Turn the jack lever (2) clockwise to raise the jack, until it locates into the jacking point. Make sure that the base of the jack is in full contact with the road surface. Raise the vehicle with the jack, until the tyre being lifted just clears the ground. Operate the jack with a slow and steady motion.
How do you adjust the suspension on a Range Rover?
- Press and hold to raise the rear suspension.
- Press and hold to lower the rear suspension.
- Simultaneously press and hold both buttons to set the rear suspension to the normal height setting. A time delay may be evident before the vehicle reacts to a suspension height request via the buttons.
How do you reset the check engine light on a Range Rover?
- Turn off your vehicle and put on the proper safety gloves and glasses.
- Locate your battery under the hood and find the negative terminal.
- Use a wrench to loosen the negative terminal connector.
- Carefully hold it to the side for 30 to 60 seconds.
How do you reset a Range Rover computer?
- To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
- The device will power down and then automatically reboot.
- Device will now power on, perform and charge as expected.
How does air suspension work on Range Rover?
The design of the air suspension in the Land Rover is impressive. The suspension is controlled electronically and allows the driver to make adjustments. The way the suspension is able to adjust is by a compressor connected to each individual air strut. The air suspension really does make for a smoother and better ride.
When did Range Rovers get air suspension?
The air suspension system improved the Range Rover’s ability to negotiate off-road terrains by making it possible to adjust the vehicle’s height from the ground. In 1995, air suspension became standard in all Range Rover models.
What does HDC inactive mean on a Range Rover?
A message that says “HDC System Not Available” means that your HDC system is failing. … Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.