How to reset range rover sport sat nav?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

Also, how do you reset a Range Rover sport navigation system? Disconnect both battery terminals, keeping them far away from the battery, connect the two with a jumper wire and wait for 10 seconds or so. This is called a ‘hard restart’ and will completely drain the capacitor for the front entertainment control system.

People ask also, how do you reset a Range Rover?

1. Go to Settings menu.
2. Select “Backup & Reset”, select “Factory data reset”
3. Select “Reset phone” and “Erase everything”
4. The device will then reboot.

Likewise, how do I reset my 2018 Range Rover?

Also know, how do you reset a Range Rover Sport 2011?

1. Press and hold the trip reset button.
2. Turn the ignition switch on to the ignition position II (one position before starting engine).
3. If the SII (Service Indicator Interval) function is enabled the information display will flash ‘SERVICE’ for 5 seconds and then display ‘SERVICE’ constantly.

1. From the Home menu screen, select Valet.
2. Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
3. Valet mode activated is displayed to indicate that a PIN has been accepted.

How do you get to the service menu on a Range Rover Sport?

Hold the Valet button on the nav for a minute or so and the menu pops up.

How do you clear the code on a Range Rover?

1. use a code reader.
2. disconnect the battery leads for a couple minutes.
3. cycle the key on and off more than 40 times. Note, this one requires the problems to be fixed before it worksthe other 2 ways do not, although the codes will return in 2 trips, otherwise.

How do you reset the suspension on a 2006 Range Rover Sport?

How do I reset my Range Rover 2019?

Youtube video link: https://m.youtube.com/watch?v=LH543AsJ5aI

How do you reset the service light on a Range Rover Sport 2018?

How do you reset the engine management light on a Range Rover Sport?

1. Turn off your vehicle and put on the proper safety gloves and glasses.
2. Locate your battery under the hood and find the negative terminal.
3. Use a wrench to loosen the negative terminal connector.
4. Carefully hold it to the side for 30 to 60 seconds.

How do you reset the service light on a 2014 Range Rover Sport?

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do I reset my 2006 Range Rover?

Press and hold the trip odometer button in the instrument cluster (left button), and turn the ignition key to the first position (KLR). Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “OIL SERVICE, or “INSPECTION”, with “reset”.

How do you reset the service light on a 2012 Range Rover Sport?

How do you reset the service light on a 2015 Range Rover Sport?