How to reset service light on 2014 range rover sport?

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

People ask also, how do you reset the service light on a Range Rover Sport?

Likewise, how do you reset the service light on a 2015 Range Rover Sport?

Also, how do you reset the service light on a 2013 Range Rover Sport?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

Also know, how do I access Range Rover service menu?

How do you reset the service light on a 2015 Range Rover Evoque?

How do you reset the service light on a Range Rover?

Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

How do you reset the service light on a 2012 Range Rover Sport?

How do you put a Range Rover in service mode?

How do you reset the check engine light on a 2016 Range Rover Sport?

1. Turn off your vehicle and put on the proper safety gloves and glasses.
2. Locate your battery under the hood and find the negative terminal.
3. Use a wrench to loosen the negative terminal connector.
4. Carefully hold it to the side for 30 to 60 seconds.

How do you reset the service light on a 2008 Range Rover Sport?

How do you get to the service menu on a 2015 Range Rover?

Hold the Valet button on the nav for a minute or so and the menu pops up.

How do you get to the message center on a Range Rover?

What is HBA Sensitivity Range Rover?

The AHBA feature automatically selects and deselects high beam under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only active when the ambient light drops below a predetermined level. Auto high beam sensitivity can be adjusted via the Vehicle settings menu.

What does it mean when the service indicator light is on?

The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.