How to reset service light range rover sport 2015?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

People ask also, how do you reset the service light on a Range Rover Sport?

Also know, how do you reset the oil light on a 2015 Range Rover? Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

Likewise, how do you reset the service light on a 2014 Range Rover Sport?

Also, how do you reset the service light on a 2013 Range Rover Sport?

1. Turn off the cars ignition.
2. Hold down the reset button on the dash board to zero the mileage.
3. Turn the cars ignition on, but do not start.
4. A menu will come up, like date/mileage.
5. Let go and then press the button again.
6. It will toggle through some options, then get to rst.

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the check engine light on a 2016 Range Rover Sport?

1. Turn off your vehicle and put on the proper safety gloves and glasses.
2. Locate your battery under the hood and find the negative terminal.
3. Use a wrench to loosen the negative terminal connector.
4. Carefully hold it to the side for 30 to 60 seconds.

How do you get to the service menu on a Range Rover Sport?

How do you reset the service light on a 2012 Range Rover Sport?

How do you reset the service light on a 2016 Range Rover Evoque?

How do you put a Range Rover in service mode?

What does it mean when the service indicator light is on?

The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.

How do I reset my Range Rover dashboard?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

How do you reset the service light on a 2008 Range Rover Sport?

How do you check the oil on a 2015 Range Rover?

1. Switch on the ignition (do not start the engine). See SWITCHING ON THE IGNITION.
2. Make sure Park (P) is selected.
3. Select Service Menu or Vehicle Information via the Instrument panel menu (see INSTRUMENT PANEL MENU).
4. Select Oil Level.
5. Top up, as instructed.

How do you reset the service light on a Land Rover Discovery 2017?