- Press and hold to raise the rear suspension.
- Press and hold to lower the rear suspension.
- Simultaneously press and hold both buttons to set the rear suspension to the normal height setting. A time delay may be evident before the vehicle reacts to a suspension height request via the buttons.
People ask also, how do I set the height on my Range Rover? To lower the vehicle to the full access height setting, press the down button (2). The full access height setting is 40 mm below the normal height setting. Auto access height can be activated until 90 seconds after the vehicle becomes stationary.
Likewise, how do you raise and lower the suspension on a Range Rover? Up button: Press and release to raise the suspension height. If a door is open, press and hold to raise the suspension height. The button’s LED indicator lamp illuminates during suspension height adjustment and extinguishes when complete. Down button: Press and release to lower the suspension height.
Also know, how do you turn on auto access height on a Range Rover? Auto access height automatically lowers the electronic air suspension to the access height setting when the vehicle is parked. See ACCESS HEIGHT. Auto access height is enabled or disabled via the Vehicle Settings instrument panel menu. See INSTRUMENT PANEL MENU.
Also, how do you lower a Land Rover?
How do you calibrate air suspension?
How do I lower my 2018 Range Rover?
What is suspension fault in Range Rover?
If the fault becomes active when the suspension is at “normal” height, the suspension is locked, preventing it from raising or lowering with a warning message “Normal Height Only”. If the suspension is lowered when the fault becomes active, it fails to raise and the warning message to not exceed 35 MPH is shown.
How do you change the height on a Land Rover Discovery?
To raise: Simultaneously press and hold the headlights button (1) and the unlock button (3) on the smart key. To set the vehicle to normal height: Simultaneously press and hold the headlights button (1) and the lock button (4) on the smart key.
What is lazy entry Range Rover?
Lazy entry mode ties the memory settings to an individual key fob/driver… so, when unlocking the vehicle… the vehicle will adjust memory positions to the specific fob before entering.
How do I lower my velar Range Rover?
To lower: Simultaneously press and hold the headlights button (1) and the tailgate unlock button (2). To raise: Simultaneously press and hold the headlights button (1) and the unlock button (3). To set the vehicle to normal height: Simultaneously press and hold the headlights button (1) and the lock button (4).
How does air suspension work on Range Rover?
The design of the air suspension in the Land Rover is impressive. The suspension is controlled electronically and allows the driver to make adjustments. The way the suspension is able to adjust is by a compressor connected to each individual air strut. The air suspension really does make for a smoother and better ride.
Where is the jack on a Range Rover Sport?
Position the jack under the relevant jacking point (1) under the floor. Do not allow the jack to contact the sill at any other point, as damage may result. Turn the jack lever (2) clockwise to raise the jack, until the jack head locates into the jacking point.