How to fix range rover bluetooth?

1. Make sure Bluetooth is activated on your mobile device.
2. Select “Tap to connect phone” on the right-hand side of your InControl Touch Pro display.
3. Your Range Rover is now discoverable.
4. On both your device and your InControl Touch Pro display, accept the Bluetooth pairing request.

People ask also, how do I reset my Range Rover Electronics?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

Also know, how do you reset a Land Rover phone?

1. Go to Settings menu.
2. Select “Backup & Reset”, select “Factory data reset”
3. Select “Reset phone” and “Erase everything”
4. The device will then reboot.

Likewise, what is the Bluetooth code for Range Rover? Select Land Rover from the list. 3. Now enter the Bluetooth PIN 2121 into the mobile phone. The phone will pair and dock to the vehicle system.

Also, how do I fix the Bluetooth pairing problem?

1. Make sure Bluetooth is turned on.
2. Determine which pairing process your device employs.
3. Turn on discoverable mode.
4. Make sure the two devices are in close enough proximity to one another.
5. Power the devices off and back on.
6. Remove old Bluetooth connections.

Why won’t my phone connect to my Range Rover?

Make sure your phone is compatible. Go into your phone’s “Settings” or “Utilities” and make sure Bluetooth® is enabled. Navigate to your phone Bluetooth® devices section and select your Land Rover vehicle’s in-car system. … When the system confirms that it is paired, Bluetooth® is enabled.

How do you clear the code on a Range Rover?

1. use a code reader.
2. disconnect the battery leads for a couple minutes.
3. cycle the key on and off more than 40 times. Note, this one requires the problems to be fixed before it worksthe other 2 ways do not, although the codes will return in 2 trips, otherwise.

How do I reset my Range Rover gearbox?

1. Press Start button but don’t turn on the engine.
2. Press the Accelerator down to the floor for about 15 seconds.
3. Hit the start button again to turn off the power.
4. Remove foot from Accelerator.
5. Waity for 2 Mins.
6. Start the engine and Drive.

How do I get my Range Rover out of valet mode?

1. From the Home menu screen, select Valet.
2. Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
3. Valet mode activated is displayed to indicate that a PIN has been accepted.

How do you reset a Land Rover Discovery 4?

Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

How do you reset a Range Rover Evoque?

How do you reset the ECU on a Range Rover Sport?

How do I pair my 2011 Range Rover Bluetooth?

Does 2006 Range Rover have Bluetooth?

On paper, our 2006 Range Rover Sport seemed to have an admirable armory of cabin luxury and technology: cherry-wood accents, voice-enabled GPS satellite navigation, Bluetooth phone integration, a 550-watt Harman Kardon stereo with optional satellite radio, and a rear-seat DVD entertainment system.

How do I connect my Bluetooth to my 2011 Range Rover?