Hold the Valet button on the nav for a minute or so and the menu pops up.
People ask also, how do I put my Range Rover into service mode?
Also the question Is, how do you get to the service menu on a Range Rover Sport?
Moreover, how do you put a Range Rover in service mode 2016? To put in Service mode: In the car with ignition in Position II, press the brake pedal three times and hold the pedal down. Push down on the EPB switch for 3-5 seconds. Go to the main fuse box in the engine bay and remove FL8 fuse 30A (pink Fuse) this will ensure that the EPB is not accidentally re-engaged.
Also, how do I check my Range Rover Evoque service?
The Service Mode and Transport Mode can be enabled and disabled by using the Land Rover InControl Remote Smartphone App, or via the InControl website. The service and transport mode actions prevent stolen vehicle tracking alerts being raised while the vehicle is being transported or serviced.Contents
How do you lift a Range Rover with air suspension?
Up button: Press and release to raise the suspension height. If a door is open, press and hold to raise the suspension height. The button’s LED indicator lamp illuminates during suspension height adjustment and extinguishes when complete. Down button: Press and release to lower the suspension height.
Hold the Valet button on the nav for a minute or so and the menu pops up.
How do you get to the message center on a Range Rover?
How do I reset my Range Rover valet mode?
- From the Home menu screen, select Valet.
- Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
- Valet mode activated is displayed to indicate that a PIN has been accepted.
Where is the handbrake on a Range Rover Sport?
On Discovery 3 and 4 and Range Rover Sport 1 models the electronic park brake system comprises four main parts: the driver’s switch in the cab, the brake module mounted in the centre of the chassis infront of the spare wheel, the cables that run from the module to the wheel brakes to operate them, and the brakes …
How do you release the parking brake on a 2018 Range Rover Sport?
With the ignition switched on, press the brake pedal and press down on the EPB switch. This will release the EPB.
Where is the handbrake in a Range Rover?
The Electric Parking Brake (EPB) switch is located on the switch pack between the steering wheel and the driver’s door. Operate as follows: With the ignition switched on, press the brake pedal and pull the EPB switch out to release the EPB.
How do I know when my Range Rover is due for a service?
Your vehicle is fitted with a service interval indicator in the instrument panel. When a service is due, and when the ignition is switched on, the relevant service message and estimated distance to the next service is displayed.
Can I get my Range Rover serviced anywhere?
You have the right to have your Land Rover serviced according to the manufacturer’s maintenance schedule at any qualified shop, including your local independent Land Rover repair shop. Taking your vehicle to your local Land Rover service center for routine service does NOT void the warranty.