How to reset a range rover?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

Likewise, how do you reset a Range Rover 2018?

Also, how do you reset the 2016 Range Rover? Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

People ask also, how do I reset my 2012 Range Rover Sport?

Also know, how do you reset a Range Rover l322?

How do you reset the ECU on a Range Rover Sport?

How do you reset the service light on a 2015 Range Rover?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

How do you reset the service light on a 2015 Range Rover Sport?

How do you put a Range Rover in service mode?

How do you reset a 2011 Range Rover?

1. Press and hold the trip reset button.
2. Turn the ignition switch on to the ignition position II (one position before starting engine).
3. If the SII (Service Indicator Interval) function is enabled the information display will flash ‘SERVICE’ for 5 seconds and then display ‘SERVICE’ constantly.

How do you reset the service light on a 2014 Range Rover Sport?

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service light on a 2009 Range Rover?

How do you clear the code on a Range Rover?

1. use a code reader.
2. disconnect the battery leads for a couple minutes.
3. cycle the key on and off more than 40 times. Note, this one requires the problems to be fixed before it worksthe other 2 ways do not, although the codes will return in 2 trips, otherwise.

How do I reset my Range Rover Smart Key?

Position the Smart key flat against the side of the steering column. There are markings on the steering column to help locate the correct position. While holding the Smart key in position, firmly press and hold the brake pedal. Press and release the engine START/STOP button.

How do you reset the suspension on a 2006 Range Rover Sport?