How to reset windows on range rover p38?

1. Close the window fully.
2. Release the switch, then lift it to the close position.
3. Release the switch.
4. Repeat the lift and release procedure twice more.
5. Test the window for correct manual and automatic switch operation.
6. Repeat the procedure on each window.

Also know, how do you reset the EAS on a Range Rover P38? Range Rover P38 EAS Reset Tool Just plug it in and within 30 seconds any soft faults logged in the EAS ECU will be read and reset. The tool uses the dashboard display to inform you of the progress (MAX 35MPH -> EAS MANUAL -> Faults and Display cleared. Works on all P38 Range Rovers produced between 1994 and 2002.

Correspondingly, how do you adjust the windows on a Range Rover?

Also the question Is, how do you enter the EKA code on a Range Rover P38?

Similarly, how do I reset my power window calibration?

What to do if power windows stopped working?

Turn the key to the Run position, but don’t start the car. If the fuse is blown, pushing a window button will do nothing at all: The motor won’t groan and the glass won’t quiver. If the fuse is good and you can hear the motor, or the glass acts like it wants to move, then you’ve got some sort of mechanical problem.

How do you reset the air suspension on a Range Rover?

What is a P38 Range Rover?

It included an updated version of the Rover V8 engine, with the option of a 2.5-litre BMW six-cylinder turbo-diesel. … It is usually known as the Range Rover P38 or P38A outside of Land Rover, after the office building in which the vehicle development team was based.

Where is the ECU on a P38 Range Rover?

A very Large ECU found under the seat of all P38 Range Rovers (1995 to 2002). This ECU has almost certainly been custom designed by Rover specifically for this vehicle and forms the mainstay of the vehicles operation.

How do you unlock a Windows Range Rover?

How do I reset my Discovery 4 Windows?

1. Push and hold down both the front window buttons on the drivers door.
2. Pull and hold the front window buttons until the windows have full raised.
3. Release the buttons.
4. Immediately pull the buttons up again and hold for 10 seconds.
5. You may hear a click during stage 4.

How do I reset my windows Freelander 2?

1. Close the window fully.*
2. Release the switch, then lift it to the close* position and hold for two seconds.*
3. Open the window fully.*
4. Release the switch, then push it to the* open position and hold for two seconds.*
5. Lift and release the switch to operate the*
6. Repeat the procedure on each window.

How do you unlock a Range Rover without a key?

How do I enter Immobiliser code?

1. Using the key, turn the. driver’s door lock (clockwise),
2. Enter the FIRST digit of the code. If the first digit is 4, turn the.
3. Enter the SECOND digit of the code.
4. Enter the THIRD digit of the code.
5. Enter the FOURTH digit of the code.
6. Finally, turn the key to the.

How do I find my Immobiliser code?

Immobiliser codes are available online using the Vehicle Identification Number VIN, Auto Locksmiths & Auto Electricians can use the Immobiliser Code, Emergency Key Access Code (EKA) or IMMO code to start your car or van.