HDC icon: Touch and briefly hold to enable the HDC system. The instrument panel displays a confirmation message and illuminates the HDC warning lamp to confirm selection. Touch and briefly hold the icon again to disable the HDC system.
Furthermore, how do I turn off Hill Descent Control? System Operation The hill descent control indicator light blinks if the switch is ON and all operating conditions are not met or if the system becomes disengaged for any reason. To turn OFF the hill descent control system, push the switch to the OFF position.
People ask also, how do you turn off the HDC on a 2012 Range Rover Evoque?
- Press to switch HDC on and off.
- Press to increase the set speed.
- Press to decrease the set speed.
In this regard, where is the HDC button? The HDC button is located on the centre console. The speed limits for the HDC system are adjusted via the control buttons mounted on the right side of the steering wheel. Dependent on the vehicle’s specification, the HDC button also operates the All Terrain Progress Control (ATPC) system.
Also know, how does Hill Descent Control Work Land Rover? Hill Descent Control reduces the wasted braking potential by changing braking pressure to each wheel, which means each is then braked to its traction limit. The driver sets a descent speed, and the computers take care of the rest. The speed of the car is calculated from averaging the speeds of each of the four wheels.WARNING When the Hill start assist warning light illuminates, have the vehicle inspected at an authorized SUBARU dealer. While the Hill start assist system is deactivated, the Hill start assist OFF indicator light illuminates continuously to inform the driver that the Hill start assist system is not operational.
What does symbol of car going downhill mean?
What the hill descent control light means. … This indicator light cannot tell you when the brakes are being applied, but you’ll know it’s working if your vehicle is maintaining a constant speed without your having to apply the brakes.
What is Range Rover HDC?
Land Rovers feature the HDC, which stands for Hill Descent Control system. … When the HDC is turned on, the vehicle will use the anti-lock braking system during descent to control the speed of each wheel on the vehicle. The driver can use cruise control to adjust the speed to a level that is comfortable.
What does HDC inactive mean on a Range Rover?
A message that says “HDC System Not Available” means that your HDC system is failing. … Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.
What is HDC system fault?
HDC is sensitive to differences in voltage across the vehicle’s electrical systems. … If you see the “HDC Fault System Not Available” message while the brake warning light or ABS warning light are illuminated, this can indicate a failure in any or all of these systems.
What is Hill Assist in car?
“Hill Start Assist is a feature that automatically activates to stop your car from rolling back when you press and release the brakes on a hill by holding the brake pressure.”
What is the difference between Hill Assist and hill descent control?
Hill Descent Control can be used when navigating steep inclines, particularly in rough terrain, which can put your vehicle at risk. Hill Start Assist is useful in any situation where you’re stopped on a hill, particularly so in bumper to bumper traffic, or driving a steep driveway or ramp.
What does Downhill Assist Control do?
What does the downhill assist control system do? If your car is equipped with the downhill assist control (DAC) system (optional equipment), you have the capability of driving down a steep grade without having to use the brakes. … The system uses engine braking to prevent your vehicle from speeding up.
What does Downhill brake Control do?
The Downhill Brake Control (DBC) assists the driver when descending a steep hill without the driver depressing the brake pedal. It slows the vehicle to under approximately 6.3 mph (10 km/h) and lets the driver concentrate on steering the vehicle. … Noise or vibration may occur from the brakes when the DBC is activated.
How do I reset my traction control light?
The first thing to do, if your traction control warning light comes on while you are driving, is to find a safe spot to pull over. Turn your vehicle off, then restart it. If the traction control warning light stays off, there was a momentary glitch in the system, and you should be fine to continue.