Unfortunately, the SRS Airbag light doesn’t reset on its own. Even if the problem has been addressed, you will need an Airbag scanner to reset the light. Very often the light goes on because of a dying battery. But once the light is on, it will stay on even when you install a new battery, until you manually reset it.
Also know, how do I get the SRS light off?
Also, what is the SRS light on a Mercedes? The SRS Light in your Mercedes-Benz is an acronym for “Supplement Restraint System.” So, what does this mean? Your SRS light coming on and staying on is indicating that there is an issue with your Mercedes-Benz airbags and components that are related to and part of the SRS system.
Likewise, how do you reset the SRS light on a Mercedes w211?
- Locate the fuse panel cover and remove it.
- Put the key into the ignition and turn it to the “Run” position.
- Check your owner’s manual for what the codes mean.
- Unplug the scan tool and put the fuse panel cover back in place.
People ask also, can you drive with the SRS light on? While you can certainly drive while your SRS light is on, it isn’t safe. You should get your vehicle to a service center as soon as possible so that a technician can inspect your SRS computer.
Contents
How much does it cost to fix SRS light?
What is typical cost to resolve an illuminated Supplemental Restraint System (SRS) Warning Light? Expect to pay between $100 to $200 for the initial diagnostic.
Why does my SRS light stay on?
If the SRS light stays on or starts flashing on and off, you may have a problem with the airbags themselves, a loose wire, a faulty seat belt buckle, or a problem with the Engine Control Unit (ECU) that is causing the airbag warning light to stay on.
Will disconnecting battery reset airbag light?
Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. … Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.
How do I fix my SRS light on my Mitsubishi?
- Plug the Mitsubishi airbag scanner into the OBD2 port under the dashboard, driver’s side.
- Turn on the ignition and allow the scanner to power on.
- Select your Mitsubishi model and year.
- Select SRS / Airbag Control unit from the main menu.
- Select Read Fault Codes.
What is SRS malfunction in Mercedes?
SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.
Will airbag deploy if SRS light is on?
The light coming on tells you that there’s a problem with your car’s airbag system. The first and most important thing to remember if your airbag warning light comes on is that, should you be involved in an accident, your airbags will not deploy.
What does SRS warning light mean?
The SRS warning light indicates a malfunction in the airbag system, front passenger occupant classification system or the seatbelt pretensioner system.
How is SRS light diagnosis?
The Bulb Check: SRS Warning Light When the vehicle is first started, the SRS light should illuminate for 1 to 5 seconds while the system goes through a self-test sequence. If the light goes out, then the system is ready. If the light stays on, there is a fault somewhere in the SRS system.
Is SRS light an MOT failure?
Answer. If your airbag light is on or your SRS supplementary restraint system warning lamp is on it will fail its MOT. … You can also try to reset the airbag or SRS light which may resolve the problem.
What SRS means?
SRS stands for supplemental restraint system, which relates to your vehicle’s airbags. Related: What’s in a Name? For High-Tech Safety Features in Cars, a Lot of Confusion. If the SRS light illuminates while you are driving, it signals there’s an issue with the car’s airbag system.