All late model MBZ cars as well as the ML use 5×112. The OFFSET (ET #) varies across models so often you can’t put an S-class wheel on an E etc. If the offset is lower than required you can use spacers to correct it. The newer models also use a 14M lug bolt with a corresponding ball seat.
People also ask, can I use 5×112 on 5×114 3? These bolts will also work as standard lug bolts if you plan on swapping wheels often. Say you want to pull off your 5×114. 3 wheels and put back on your 5×112 summer or track tires, you can still use these same bolts!
Also, what bolt pattern does Mercedes use? 5×112 bolt pattern or 5×4. 4 in inches is used on 302 models. Wheels with this bolt pattern are most often used on Volkswagen, Mercedes-Benz, Audi, BMW, McLaren, Skoda.
Also know, what cars use 5×112 bolt pattern? The 5×112 bolt pattern is mainly associated with Audi, BMW, Mercedes-Benz, and Volkswagen cars.
Likewise, is 5×120 the same as 5×112? well, 5×120 is a larger radius than 5×112 so shouldnt the imaginary circumference made by the lug pattern & distance between each hole fit? or do i have ****ed up logic.
Contents
Will Audi wheels fit a Mercedes?
Those hub rings are at every wheel shop you go to for every adaptation you can think of. But there is no way you can fit a wheel that was specifically made to an Audi center bore to go on a Benz without resizing the bore to our specs. But the bolt pattern is fine.
Can you convert 5×112 to 5×114?
This wheel adapter set converts a 5×112 VW/Audi vehicle to a 5×114. … The adapter features a 57.1mm center bore allowing hubcentric fitment to your vehicle. This adapter is available in a range of thicknesses from 15mm-35mm. The 5×114.
Is 5×114 3 the same as 5×120?
Premium Member. Yes, must have been a custom redrill. 5×120 is different. The only thing that I believe is the same as 5 x 114.3 is 5 x 4.5 as it is sometimes referred to…
What are wobble bolts?
What are Wobble Bolts? The correct term is PCD Variation Bolts. This type of bolt has a unique rotating washer collar that sits beneath the hex and above the threaded stud. The 60° tapered collar is able to move 2.3mm in any given direction.
What does 5×112 PCD mean?
The 5×112 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (112), the notional circle determined by the center position of the studs. The 5×112 bolt pattern is common to Aiways, Alfa Romeo, Audi, BMW, BMW Alpina, Bentley and Borgward vehicles.
What is a 5×5 bolt pattern?
The 5×127 bolt pattern, also called 5×5″, is most commonly known for it’s use in the 2007 and newer Jeep Wranglers. It is also used in the Jeep Grand Cherokee and many Chevy/GM applications through various years.
Will BMW wheels fit Mercedes?
RE: rims on mercedes You have to get some special adapter for it to fit. So go for it!
How do I know what rims will fit my car?
The two easiest ways are to check the sticker plate in your car, it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.
Will rims from one car fit another?
Fortunately, it’s possible to use a replacement wheel from any vehicle. However, you should ensure that that the original wheel has the same bolt pattern, wheel offset, and size of the new one. You can find the right size of the substitute by checking the sticker plate on your door.
What BMW uses 5×112?
Nearly all BMWs have 5 lug bolts in a 120mm bolt circle. Beginning with the G01 7-series chassis in 2009, all G-chassis use a 5×112 bolt pattern – the same number of lug bolts but in a 8mm tighter circle. This is also the spec used by Audi, VW, and Mercedes.