2. Place the jack directly under the jack-up point as illustrated so the top of the jack contacts the vehicle at the jack-up point. Align the jack head between the two notches in the front or the rear as shown. Also fit the groove of the jack head between the notches as shown.
Contents
Where should jack stands be placed?
Place your jack stand Jack stands must be placed directly under the lifting point. There should be enough room at every jack point to accommodate the stand’s grip. When releasing hydraulic pressure from the floor jack, a properly rated jack stand will hold the weight of the car as long as the stand is flat.
How do you jack up a 2003 Nissan Altima?
Do I need two jack stands?
If lifting just one end of your car, you’ll need two jack stands. If you’re lifting the entire car, use four jack stands. On soft earth, such as asphalt or grass, thick plywood can prevent them from sinking.6 jan. 2019
How do you use the jack in a Nissan Altima?
Does 2020 Nissan Altima have a spare tire?
The Altima has a standard space-saver spare tire so you can replace a flat tire and drive to have the flat repaired or replaced. If a vehicle has no spare tire you are forced to repair the tire and if that fails you will have to call roadside assistance and get towed.
How can I lift my car without a jack?
Loosen wheel nuts, presuming it is for a wheel change. Raise the car to max suspension height. Place an axle stand or similar at the jacking point. Lower the suspension to minimum height and the wheel magically lifts off the ground.
Can you jack a car from the front?
Start jacking from the front of the vehicle. The front end of four-wheel-drive trucks can be raised by placing the jack under the differential. For two-wheel-drive trucks, place the jack beneath the jacking pad under the engine. … Look at the front of the vehicle to make sure it’s not leaning to one side.
Is it safe to use 4 jack stands at once?
A floor jack is what will help you get under your car and lift it up so that the vehicle rests on the jack stands properly. Although working under your car while it is fully supported by four jack stands is relatively safe, it is still recommended that you have a trusted friend with you while you work.
How do you change tire?
1. Find a Safe Location. As soon as you realize you have a flat tire, do not abruptly brake or turn.
2. Turn on Your Hazard Lights.
3. Apply the Parking Brake.
4. Apply Wheel Wedges.
5. Remove the Hubcap or Wheel Cover.
6. Loosen the lug nuts.
7. Place the Jack Under the Vehicle.
8. Raise the Vehicle With the Jack.
What size tires does a Nissan Altima have?
Not only does the tire measurements seem like a cryptic riddle you have to solve, but the Nissan Altima offers three different tire sizes—the standard P215/60HR16, the optional P215/55VR17, and the available P235/40VR19.
Where is the jack on a 2013 Altima?
What can I use instead of jack stands?
In a pinch, dense pieces of wood stacked lengthwise can be used to support weight in lieu of jack stands. Cinder blocks should NEVER be used, as they are not weight rated and could crumble without notice. Another emergency solution is setting the unused tire between the chassis and the ground as you change them out.25 jan. 2017
Are Walmart jack stands safe?
Walmart has issued a nationwide recall for nearly 14,000 Hyper Tough® 2-Ton Jack Stands due to a safety risk. Walmart said the jack stands broke during safety tests by an independent third-party laboratory. The failure occurred in the ratcheting bar. … Owners may contact Walmart at 1-800-925-6278.9 sept. 2020
Is it safe to jack up one side of a car?
Where Is It Safe To Jack Up A Car? The safest places to jack up a car are either the cross members or beneath the diff pumpkin. Although it is possible to jack up a car on any of its left or right sides, it is much better to do so from either the front or back of the car which accords greater stability.3 nov. 2020