5.5 quarts. . . . (with filter)After refill check oil level. Torque: 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.
In this regard, what oil does a Subaru Forester 2012 take? The recommended oil type that should be used on Your 2012 Subaru Forester is 0W-20 synthetic. If You can’t find that type of oil then You are also allowed to use 5W-30 or 5W-40 conventional oil.
Additionally, how many Litres of oil does a Subaru Forester take? Foresters with petrol engines have a 4.8 litre oil capacity, while the diesel engines require almost six litres of oil, so make sure you buy enough as well as a little for top ups in the future.
Quick Answer, how much oil does a 2.5 liter Subaru engine take? For the 2.5L 4-cylinder engine, the capacity is 5.1 quarts; for the 3.6L 6-cylinder engine, the capacity is 6.9 quarts. Again, you’ll want to check the level to make sure you don’t have too much or not enough oil.
Considering this, how much oil does a 2013 Subaru Forester take? Capacity: 5.5 quarts. . . . (with filter)After refill check oil level.4.4 quarts. . . . (with filter)After refill check oil level. Torque: 32.5 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.
Contents
How do you reset the oil light on a 2012 Subaru Forester?
- Switch the Ignition ON.
- Using the UP and DOWN arrows located on the steering wheel, within the MENU toggle to SET.
- Pull and HOLD the CENTER button until you see the MAINTENANCE menu.
- Choose ENGINE OIL from the options.
- Press SET.
- Type in the mileage you want until the next oil change is due. DONE!
How much oil does a 2009 Subaru Forester take?
The 2009 Subaru Forester uses SAE 5w-30 or 5w-20 viscosity fully synthetic engine oil. This car has an oil capacity of 4.4 quarts.
Does Subaru Forester require synthetic oil?
Subaru Synthetic Motor Oil. If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.
How much oil does a 2008 Subaru Forester take?
The 2008 Subaru Forester oil capacity is 4.0 liters (4.2 US Quarts).
How much oil does a 2013 Subaru Outback take?
5.1 quarts. . . . (with filter)After refill check oil level.
What type of oil does a 2013 Subaru Forester take?
The 2013 Subaru Forester oil type and capacity is OW-20 and 5W-30 and 4.4 or 5.5 quarts. Having high quality oil is essential for the engine to run smoothly. You will run into issues with this fluid at some point.
How much oil does a 2.5 Subaru Outback take?
2019 Subaru Outback requires full synthetic oil. The 2.5L 4 -cylinder engine runs on SAE 0W-20 and holds 5.1 quarts.
How much oil does a 2010 Forester take?
SAE 5W-30 is preferred. Capacity: 4.4 quarts. . . . (with filter)After refill check oil level.
How much oil does a 2015 Subaru Forester take?
5.1 quarts. . . . (with filter)After refill check oil level.
Is it OK to use 5w30 instead of 0w20?
0w20 is a fully synthetic motor oil. 0w being the winter weight, the viscosity of the oil at freezing temperatures. 20 is the finishing weight or how thick it is, when the engine is at operating temperature. 5w30 can be fully synthetic, however, putting it into your engine which is designed for 0w20 is a bad idea.