A Subaru Forester transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.
People also ask, how much transmission fluid does a Subaru Forester need? The transmission fluid capacity on the Forester is 9.8 US quarts. If You are also looking for which transmission fluid to use, then Subaru ATF or Idemitsu ATF HP are recommended.
Likewise, how much transmission fluid does a Subaru take? It will drain about 4 quarts. Subaru recommends to drain all of the fluid into a container and measure it to replace the amount drained.
Similarly, how much transmission fluid does a 2000 Subaru Forester? The manual says “Initial Fill: 6.8 quarts“.
Also know, how much transmission fluid does a 2014 Subaru Forester take? A 2014 Subaru Forester transmission flush also uses about 10 quarts of fluid to entirely clean and flush out the system.2 liters seems to be the answer.
Contents
How often should transmission fluid be changed Subaru Forester?
Most new vehicles are equipped with an automatic transmission. As a result, there’s not really much maintenance to perform. Still, most owner’s manuals will recommend changing the transmission fluid every 90,000 miles or so.
What kind of transmission fluid does a Subaru Forester take?
For automatic transmissions, Subaru recommends using Subaru ATF Idemitsu ATF hp “Dexron iii” type automatic transmission fluid. It is recommended to change Your transmission fluid every 80,000 miles.
How do you check the transmission fluid in a Subaru Forester?
Automatic Transmission Fluid Park on a level surface and set the parking brake. Shift the selector level in each position. Then shift it in the “P” position, and run the engine at idling speed. Pull out the dipstick and check the fluid level on the gauge.
How much transmission fluid does a 2008 Subaru Outback take?
If I remember right the total capacity is about 7 or 8 quarts. A simple drain will only change out about 3 to 4. If you want a total flush: -Drain all you can from the tranny.
How much oil does a 2000 Subaru Forester take?
4.2 quarts. . . . (with filter)After refill check oil level.
What kind of transmission fluid does a 2001 Subaru Forester take?
FRAM Transmission Fluid – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid 1 Quart (Part No. F420)
What type of transmission fluid does a 2003 Subaru Forester use?
Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.
How often should you change Subaru CVT transmission fluid?
For example, the 2018 Subaru Outback should have its CVT fluid inspected by a dealership pro every 30,000 miles, according to the owner’s manual. Eventually, the CVT fluid will need to be flushed and replaced — but it can last up to 100,000 miles or more in some cases before it goes bad.
How much does it cost to replace a Subaru CVT transmission?
Common Subaru CVT Repair Costs: If your CVT has tanked, a new unit costs roughly $7,000-8,000, while used CVT replacements cost about $1,000-3,000.
How much oil does a transmission take?
In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up.