Shift the selector level in each position. Then shift it in the “P” position, and run the engine at idling speed. Pull out the dipstick and check the fluid level on the gauge. If it is below the lower level on the “HOT” side, add the recommended automatic transmission fluid up to the upper level.
Similarly, how do you check the transmission fluid on a 2009 Subaru Forester?
Also know, how do you check transmission fluid in 2010?
Also, where is the transmission dipstick on a Subaru? Open the hood and pull out the looped handle in the back of the engine. This is the transmission dipstick.
Likewise, what kind of transmission fluid does a 2010 Subaru Forester take? The 2010 Subaru Forester uses API GL-5 75w-90 oil for manual transmissions. For automatic transmissions, Subaru recommends using Subaru ATF Idemitsu ATF hp “Dexron iii” type automatic transmission fluid. It is recommended to change Your transmission fluid every 80,000 miles.Automatic Transmission Fluid Park on a level surface and set the parking brake. Shift the selector level in each position. Then shift it in the “P” position, and run the engine at idling speed. Pull out the dipstick and check the fluid level on the gauge.
Contents
How do you check the transmission fluid on a 2010 Subaru Legacy?
What are the signs of low transmission fluid?
- Noises. If your transmission is working properly, you shouldn’t hear any noise while you’re driving as it should transition smoothly.
- Burning Smell. Any foul smell coming from your car should direct you to your nearest service center.
- Transmission Leaks.
- Slipping Gears.
Why is there no transmission dipstick?
Automatic transmissions which use World Standard (WS) fluid are sealed and do not consume fluid. This eliminates the need for periodic fluid checking using a dipstick. The transmission fluid does not need to be replaced unless an inspection shows it has become necessary.
How do you check transmission fluid without a dipstick?
Where do I add transmission fluid?
Insert long funnel into automatic transmission fluid dipstick hole. Carefully add automatic transmission fluid in small increments and recheck level each time until fluid level reaches “warm” line. CAUTION: DO NOT OVERFILL OR SPILL AUTOMATIC TRANSMISSION FLUID ON HOT ENGINE PARTS!
How do you fill transmission fluid in a Subaru?
You’ll need a funnel and a bendy tube that can reach down to the transmission dipstick hole to fill it back up. Stick one end of the bendy tube into the dipstick hole and attach the funnel to the other end. Carefully pour in the transmission fluid. Be careful not to overfill the transmission with fluid.
How many quarts of transmission fluid does a Subaru Forester take?
The transmission fluid capacity on the Forester is 9.8 US quarts. If You are also looking for which transmission fluid to use, then Subaru ATF or Idemitsu ATF HP are recommended.
How often should you change transmission fluid in Subaru Forester?
Most new vehicles are equipped with an automatic transmission. As a result, there’s not really much maintenance to perform. Still, most owner’s manuals will recommend changing the transmission fluid every 90,000 miles or so.
What transmission fluid does a 2011 Subaru Forester take?
Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.