AccuTune Off-Road has a large selection of Extended Travel Upper Control Arms for your 2010 – 2017 Toyota 4Runner. When you lift the front of a Toyota 4Runner taller than 2″, an after market upper control arm is required. Tubular UCA‘s are the least expensive and most common solution.
Beside the above, what year 4Runner is best for off roading? The third generation of Toyota 4Runner ran from 1996-2002. This generation gives you many model years to pick from if you’re interested in checking one out. It’s also considered the best generation for a used 4Runner to go off-roading in.
Also know, what does 4Runner mean on a Toyota? The 4-wheel drive off-road runner describes what this SUV is perfectly well. The 4Runner Toyota SUV name is easily one of the most recognizable in the market. And now we know definitively that 4Runner stands for 4-wheel drive off-road runner.
Also, are 4runners easy to fix? The Toyota 4Runner Reliability Rating is 4.0 out of 5.0, which ranks it 9th out of 26 for midsize SUVs. The average annual repair cost is $514 which means it has lower than average ownership costs. The frequency and severity of repairs are both fairly average when compared with all other vehicles.
Also the question is, do you need new upper control arms for a 3 inch lift 4Runner? No, aftermarket up control arms are not required on 03-19 Toyota 4Runner. The 4Runner UCA’s provide enough alignment adjustment to set the vehicle within the factory alignment spec range.
Contents
What do upper control arms do?
A control arm’s purpose is straightforward. It connects the steering knuckle to the frame and stabilizes the vehicle by allowing the chassis and the wheels to move in unison while the vehicle is in motion.
What are the best years of 4Runners?
According to J.D. Power reliability ratings, the 2010-2013 4Runners all have “Great” reliability scores. Consumers named the 2010, 2011, and 2012 model years No. 1 and the 2012 Toyota 4Runner took a No. 2 spot.
What model 4Runner should I buy?
While all 4Runners are capable off-road vehicles, the third and fourth generation are probably your best bet. They combine powerful engine options with robust 4WD systems yet also offer better build quality and safety features.
How many miles will a 4Runner last?
A Toyota 4Runner Could Last You 300,000 Miles As a matter of fact, most of the research suggests that about 0.2% of 4Runner models will last for more than 300,000 miles.
What problems do Toyota 4Runners have?
Many owners have complained about issues in the front brake calipers and front brakes, warping problems, and premature wear in the front brake rotor and brake master cylinder. Fourth generation 4Runners are notorious for brake problems, especially the 2003-2005 model years.
What does SR5 mean 4Runner?
SR5 stands for Sport Rally 5 speed. SR5 stands for Sport, R as in engine family RE (EFI) & 5 as in 5 speed transmission. Somewhat correct with the above answer though not fully accurate. SR5 generally denotes a specifc Toyota trim level, with a more. sporty look, firmer suspension and wide flexibility for options.
How can I get better gas mileage in my Toyota 4Runner?
- Reduce excessive short trips.
- Keep RPMs low.
- Reduce the A/C use.
- HCF (Hydrocarbon filter) delete: Check this out.
- Reduce frequent cold-weather travel.
- Manage throttle acceleration: Check Price.
- Reduce vehicle weight or towing weight.
- Reduce excessive speeds.
How long do 5th gen 4Runner brakes last?
Toyota 4Runner brake pads usually last between 30,000 and 70,000 miles depending on your driving habits.
How long will a 4th gen 4Runner last?
Off the bat, these models offer the same reliability that Toyota is known for. With proper maintenance, 4th gen. 4Runners can run for at least 500,000 miles, which is pretty incredible.
Are 4Runners expensive to maintain?
Toyota 4Runner Maintenance Costs A Toyota 4Runner will cost about $5,825 for maintenance and repairs during its first 10 years of service. This beats the industry average for popular SUV models by $3,055. There is also a 16.08% chance that a 4Runner will require a major repair during that time.
Do I need UCA with 2 inch lift?
You don’t need the UCA. I did the 2.5” MotoFab level kit and worked great without issues.
Are upper control arms necessary 4runner?
No, you don’t need UCA’s.
Do you need new control arms for a 2 inch lift?
If you are only doing a 2 inch level you do not need new upper control arms. Once you go above 2 inches you need to consider it.
What do aftermarket UCA do?
The UCA is generally not a load bearing piece of an IFS suspension; rather, its purpose is to guide your spindle in a pre-determined motion when your suspension cycles up or down. Load is usually handled by the lower control arm, which connects to the lower portion of the spindle.
Are upper control arms worth it?
They are a massive increase in strength over the factory ball joints and are right at home on trucks racing in the Baja 1000. You won’t have to worry about the uniballs in most aftermarket arms ever failing. They do wear faster than standard ball joints but are much stronger.