- Prepare tools. – Get together all your supplies and tools.
- Let the car sit.
- Put a pan under the drain plug.
- Drain the old oil.
- Take out the oil filter.
- Install the new oil filter.
- Pour new oil in.
- Check the oil level.
People ask also, how often does a 2010 Toyota Corolla need an oil change? The Toyota handbook that came with your Corolla can give you a recommended oil change schedule, which is about every 6 months or 5,000 miles. That being said, many drivers opt to change their oil more frequently, instead bringing them in every 3 months or 3,000 miles.
Furthermore, where is the oil filter located in a 2010 Toyota Corolla?
Also know, how much oil does a 2010 Corolla hold? The 2010 Toyota Corolla useS4. 4 quarts of oil for the 1.8l engines and 4.0 quarts for the 2.4l engines. It is recommended to use SAE 5w-20 oil although You can also use 0w-20.
Moreover, does a 2010 Toyota Corolla require synthetic oil? The 2010 Toyota Corolla‘s 1.8 liter 4Cylinder engine requireS4. … The 2.4 liter 4Cylinder useS4 US quarts of 5W-20 or 0W-20. Oil and filter changes should be scheduled every 7,500-10,000 miles or 12 months if using fully synthetic lubricants, or every 3,000-5,000 miles or 6 months, if filling with conventional oil.Synthetic oil regularly should be changed every 7,500 – 10,000 miles. Toyota recommends getting your Toyota Corolla oil & filter changed every 3,000-5,000 miles for conventional oil. … Our service center strives to correctly diagnose your vehicle the first time, whether you need an oil change or a new transmission.
How do you reset the maintenance required light on a 2010 Toyota Corolla?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer buttonfor around 10 seconds. The maintenance light should begin to flash, and you may hear a beeping. Then the light should go out.
How do you change the air filter on a 2010 Toyota Corolla?
What size is the oil filter wrench on a 2010 Corolla?
The 2010 toyota corolla requires a 64.5Mm sized oil filter wrench in order to remove the engine oil filter.
How long can a Toyota Corolla go without an oil change?
An oil change is one of the most necessary and decisive services for your car. Synthetic oil usually should be changed every 7,500 – 10,000 miles. Toyota recommends getting your Toyota Corolla oil & filter changed every 3,000-5,000 miles for conventional oil.
What does Toyota recommend for oil?
These motor oils are specifically designed to work with Toyota engines and will offer better performance than other motor oil options. However, if you are interested in using different motor oil, Toyota recommends that customers use synthetic motor oil with a 5W-30 viscosity.
Is there a recall on 2010 Toyota Corolla?
Summary: TOYOTA IS RECALLING CERTAIN MODEL YEAR 2010 COROLLA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, “OCCUPANT CRASH PROTECTION.” THE AIR BAG LABEL INSTALLED ON THE DRIVER SIDE SUN VISOR CAN SEPARATE FROM THE SURFACE OF THE VISOR.
How do you check the oil on a 2010 Toyota Corolla?
Does 2010 RAV4 use synthetic oil?
Your 2010 Toyota RAV4 Motor Oil AMSOIL synthetic lubricants are the solution for drivers who want the most from their 2010 Toyota RAV4.
Do 2010 Corollas burn oil?
You probably won’t notice oil burning unless it is leaking into cylinders overnight . Then you may see a puff of smoke upon starting the engine first thing in the morning. That’s within “normal” for most engines but would be a lot of oil use.
What is the difference between 0W-20 and 5w 20?
Although 5W20 and 0W20 (0W20 synthetic oil) can be used at 20°C/68°F, 0W20 is thinner than 5W20 with cold engine temperatures, especially during the first few minutes after you start your car. New cars specify it because it gives the car a bit better fuel economy compared to the 5W20.