- Prepare tools. – Get together all your supplies and tools.
- Let the car sit.
- Put a pan under the drain plug.
- Drain the old oil.
- Take out the oil filter.
- Install the new oil filter.
- Pour new oil in.
- Check the oil level.
Subsequently, what kind of oil does a 2010 Toyota Corolla take? The 2010 Toyota Corolla 1.8L oil capacity is 4.4 quarts (4.2 liters) and 4 quarts (3.8 liters) for the 2.4L engine. The recommended oil type is the Toyota Genuine Motor Oil or equivalent to satisfy the ILSAC multigrade engine oil grade and SAE 5W-20 viscosity.
In this regard, where is the oil filter located 2010 Toyota Corolla?
Also know, how much oil does a 2010 Corolla hold? Capacity: 4.4 quarts (with filter)After refill check oil level.
Additionally, how often does a 2010 Toyota Corolla need an oil change? The Toyota handbook that came with your Corolla can give you a recommended oil change schedule, which is about every 6 months or 5,000 miles. That being said, many drivers opt to change their oil more frequently, instead bringing them in every 3 months or 3,000 miles.These motor oils are specifically designed to work with Toyota engines and will offer better performance than other motor oil options. However, if you are interested in using different motor oil, Toyota recommends that customers use synthetic motor oil with a 5W-30 viscosity.
Contents
Is there a recall on 2010 Toyota Corolla?
Summary: TOYOTA IS RECALLING CERTAIN MODEL YEAR 2010 COROLLA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, “OCCUPANT CRASH PROTECTION.” THE AIR BAG LABEL INSTALLED ON THE DRIVER SIDE SUN VISOR CAN SEPARATE FROM THE SURFACE OF THE VISOR.
How do you reset the maintenance required light on a 2010 Toyota Corolla?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer buttonfor around 10 seconds. The maintenance light should begin to flash, and you may hear a beeping. Then the light should go out.
How do you change the air filter on a 2010 Toyota Corolla?
How do you service a 2010 Toyota Corolla?
How do you check the oil on a 2010 Toyota Corolla?
Does 2010 RAV4 use synthetic oil?
Your 2010 Toyota RAV4 Motor Oil AMSOIL synthetic lubricants are the solution for drivers who want the most from their 2010 Toyota RAV4.
Is 0W-20 oil too thin?
A question from a reader: “The engine oil recommendation for my new pickup truck is 0W-20. I’ve never owned a vehicle that used anything other than 5W-30, so this is a big change. Answer: Yes, 0W-20 is unquestionably safe for your engine. …
Does a Corolla require synthetic oil?
Synthetic oil regularly should be changed every 7,500 – 10,000 miles. Toyota recommends getting your Toyota Corolla oil & filter changed every 3,000-5,000 miles for conventional oil. … Our service center strives to correctly diagnose your vehicle the first time, whether you need an oil change or a new transmission.
Does Toyota Corolla require synthetic oil?
At this point, all modern Toyota models at least recommend synthetic oil, and more and more are requiring it. To know for sure, you have to consult your manual. To simplify things though, synthetic oil is far better and it’s going to be better for your engine if you just choose to use that.
What oil is best for Corolla?
For Corollas made in 2009 or later, Toyota recommends the use of 0W-20 motor oil. These are the top quality oils in this weight: Mobil 1 Extended Performance Full-Synthetic 0W-20. Castrol Edge Advanced Full-Synthetic 0W-20.