Similarly, how do I turn off the maintenance required light on my Toyota Corolla?
- Insert the keys in the Corolla.
- Press and hold the trip reset button near the odometer until “Trip A” appears on the central screen.
- Turn the key back to “Off.”
- While pressing the button to reset the trip, turn the key back to the “On” position.
Also know, how do you turn off the maintenance light on a 2015 Toyota Corolla?
In this regard, why is my maintenance required light on after oil change? Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
Quick Answer, can I drive with maintenance required light on? Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
- Turn the key towards the starting position in the ignition.
- Make sure the odometer reading is displayed once your car’s electrical system is on.
- Then turn the key back towards the off position.
- Press and hold the reset button for the trip meters.
Contents
How do you reset the maintenance light on a 2017 Toyota Corolla?
Why does my car says change oil after I changed it?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. … The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.
Why is the maintenance required light on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.
How do I turn off the maintenance required light?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.
How long can you go without an oil change when the light comes on?
Your engine will run smoothly even if you do not change the oil too often or if you run the vehicle over the set limit. If your engine can tolerate, it will take your vehicle anywhere between 5,000 to 6,000 miles. Depending upon the age of your car, your engine can even go up to 10,000 miles.
How long can you go without an oil change with synthetic oil?
Cars can generally go 5,000 to 7,500 miles before needing an oil change. Furthermore, if your vehicle uses synthetic oil, you can drive 10,000 or even 15,000 miles between oil changes.
How do you reset the maintenance required light on a 2010 Toyota Corolla?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer buttonfor around 10 seconds. The maintenance light should begin to flash, and you may hear a beeping. Then the light should go out.
How do you reset after oil change?
Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again.
How do you reset mileage after oil change?
How do I reset my oil change?
Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.