Put your key in the ignition and turn it to position one, the position just before starting the car. Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out.
Quick Answer, how do you reset the dash light on a Toyota?
- Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
- Turn the Vehicle Off and Press the Trip Meter Reset Button.
- Turn the Vehicle Back on.
- Keep the Reset Button Pressed.
- Release the Reset Button.
Likewise, how do you reset dashboard lights?
Additionally, how do I reset my Toyota Corolla media? To reset Your 2014 Toyota Corolla radio, Press and hold the Audio system power button for 3 seconds. Then a menu will pop up and ask You if You want to reboot the system.
People ask also, how do you reset the maintenance light on a 2017 Toyota Corolla?
Contents
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
Why is my dashboard lights not working?
If the dashboard isn’t lighting up at all, your car might have blown a fuse. Removing the old fuse and replacing it should get the lights working again. While the new fuse may do the trick, it could also indicate a deeper electrical problem.
Is there a fuse for the dashboard lights?
Step 1: Locate the fuse for the dashboard lights. This fuse will be located inside one of the fuse boxes for the vehicle. The fuse boxes may be hidden under the hood near the engine or tucked away under the dashboard. Refer to the owner’s manual of your car if you are having trouble locating the fuse.
How do you reset?
- Open Settings, and select System.
- Select Reset options.
- Select Erase all data (factory reset).
- Select Reset Phone or Reset Tablet at the bottom.
- You’ll be asked to confirm, select Erase Everything.
- Your device should reboot and may show a progress screen indicating that it is erasing the data.
How do I reset my Toyota Bluetooth?
To reset your phone, power off your phone completely for 30 seconds, and turn it back on. Be sure you’re powering off your phone and not just restarting it. To reset the Entune System, press and hold the audio knob to power off the system and Entune will power off and restart on its own.
How do you reset the touchscreen on a Toyota Corolla?
With the 2014 Toyota Corolla there is no way to re-calibrate the touch screen when it is not working properly. If Your screen is not working right the first thing that You should do is try to power it off and then back on by pressing and holding the volume knob on the dash.
How do you reset the CD player on a Toyota Corolla?
Press and hold the reset button on the front of the CD player. This button is often a small black indentation that must be pressed with a pen or a pin, and will reset the settings and force eject the disc.
How do I turn off the maintenance required light?
Why is the maintenance required light on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.