Frequent question, how do I turn off the maintenance required light on my Toyota Corolla?
- Insert the keys in the Corolla.
- Press and hold the trip reset button near the odometer until “Trip A” appears on the central screen.
- Turn the key back to “Off.”
- While pressing the button to reset the trip, turn the key back to the “On” position.
Considering this, how do you reset the maintenance light on a 2017 Toyota Corolla?
- Insert the keys in the Corolla.
- Press and hold the trip reset button near the odometer until “Trip A” appears on the central screen.
- Turn the key back to “Off.”
- While pressing the button to reset the trip, turn the key back to the “On” position.
Likewise, how do I reset my Toyota maintenance?
- Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
- Turn the Vehicle Off and Press the Trip Meter Reset Button.
- Turn the Vehicle Back on.
- Keep the Reset Button Pressed.
- Release the Reset Button.
People ask also, how do you reset the maintenance required light on a Toyota Corolla 2020?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.Contents
Why is the maintenance required light on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.
How do I reset my maintenance?
How do I turn off the maintenance required light?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.
How do you turn off the maintenance required light on a 2015 Toyota Corolla?
To reset the 2015 Toyota Corolla S maintenance light put the key in the on position, turn the key off, press and hold the odo/reset button and turn the key back to the on position without starting the engine.
How do you reset the maintenance light on a Toyota Corolla?
- Turn the key towards the starting position in the ignition.
- Make sure the odometer reading is displayed once your car’s electrical system is on.
- Then turn the key back towards the off position.
- Press and hold the reset button for the trip meters.
How do you reset the maintenance required light on a 2012 Toyota Corolla?
Why does my car says change oil after I changed it?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. … The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.
Is the maintenance required light the same as check engine?
Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.
Can you pass inspection with maintenance required light on?
You can’t pass a vehicle inspection with the maintenance light on. If an inspector sees this on, they can easily find the issues and fail you—so don’t try and hide it. The only way to pass inspection after failure is to get the proper repairs done.
How do you reset the maintenance required light on a 2010 Toyota Corolla?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer buttonfor around 10 seconds. The maintenance light should begin to flash, and you may hear a beeping. Then the light should go out.