- Use your keys to turn the key to the “On” position in your Toyota Corolla, but don’t start the car.
- Locate and press and hold the “trip reset” button on the odometer.
- Then, turn the key back to “Off.”
Additionally, how do I turn off the maintenance required light on my Toyota Corolla?
- Insert the keys in the Corolla.
- Press and hold the trip reset button near the odometer until “Trip A” appears on the central screen.
- Turn the key back to “Off.”
- While pressing the button to reset the trip, turn the key back to the “On” position.
Moreover, how do you reset the maintenance required light on a Toyota Corolla 2020?
People ask also, why is my maintenance required light still on after oil change? Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
In this regard, how do I turn off the maintenance required light? Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.To reset the 2015 Toyota Corolla S maintenance light put the key in the on position, turn the key off, press and hold the odo/reset button and turn the key back to the on position without starting the engine.
How do you reset the maintenance required light on a Toyota?
- Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
- Turn the Vehicle Off and Press the Trip Meter Reset Button.
- Turn the Vehicle Back on.
- Keep the Reset Button Pressed.
- Release the Reset Button.
How do you turn off the maintenance required light on a 2017 Toyota Corolla?
How do you turn off the maintenance required light on a Toyota Tacoma 2020?
Is maintenance required the same as check engine?
Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.
Why is the maintenance required light on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.
How do you turn off the maintenance required light on a 2016 Toyota Corolla?
How do you turn off the maintenance required light on a Toyota Rav4?
Put your key in the ignition and turn it to position one, which is the position right before starting the car. Push and hold the trip meter reset button on the dashboard, then turn the key to position two. Keep holding the odometer button for 10 seconds. The light should then flash, beep, and then go out.
How do you turn off the maintenance required light on a Toyota Camry?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.
Can you pass inspection with maintenance required light on?
You can’t pass a vehicle inspection with the maintenance light on. If an inspector sees this on, they can easily find the issues and fail you—so don’t try and hide it. The only way to pass inspection after failure is to get the proper repairs done.
Why does my Toyota maintenance light keep requiring maintenance?
How Toyota’s maintenance reminder system works and what to expect. The sole function of Toyota’s maintenance reminder system is to remind the driver to take their car in for an oil change. The computer system tracks the engine miles from the time it was reset, and the light will trigger after 5,000 miles of driving.