Toyota Prius

How to reset maintenance light on 2012 toyota prius?

Furthermore, how do you reset the maintenance required light on a 2012 Toyota Prius?

You asked, how do you reset the maintenance light on a Toyota Prius? Keep holding the Prius trip reset button and turn your key back towards the “Off” position. Turn your Prius key to the “On” position. Continue holding your Prius reset button until you see the number near the odometer reach 0. You’ve succeeded in resetting your Toyota maintenance light!

Also know, how do I reset my 2012 Prius? Hold the Start button down with your index finger for at least 45 seconds. Step 2: Restart the car. Start the car normally after the system has rebooted by pushing down on the brake and pressing the Start button again.

Also, how do you put a 2012 Prius in maintenance mode?

Contents

How do you reset the maintenance light on a 2010 Toyota Prius?

How do you reset the maintenance light on a 2009 Toyota Prius?

To reset your prius simply press the power button once to power your prius down. Press and hold down the odo button and press the power button twice (2x) with your foot off the brake.

How do I turn off the maintenance required light?

How do I reset my Prius computer?

  1. Disconnect battery cables, first negative, then positive.
  2. Cover and protect the battery posts!
  3. Turn ignition to position II.
  4. Connect both battery cables (“SHORT”) for at least 10 minutes.
  5. Wait 10 minutes – then ignition off, key out.
  6. Reconnect battery positive, then negative.
  7. OBC says “PPPP”, reset time.

How do I reset my 2011 Prius?

What causes a Prius not to start?

The most common causes that hinders normal starting operation of your Prius are dead key fob battery, dead high voltage battery, dead 12v battery, clogged fuel filter, blown fuse, empty gas tank, immobilizer error or any fault in the electrical system.

What does the red triangle mean in a Prius?

If You happen to see a red triangle light come on at Your dash in Your Toyota Prius that is its version of a standard check engine light. … The red triangle warning light on a toyota prius is the check engine light and should be brought to a dealership, it could range from low oil pressure to something more serious.

How do I get my car out of maintenance mode?

Turn on the car, (or if already on), then turn it off, within 60 seconds perform the following: Turn Ig-ON but not the engine, do this by pressing the Start button twice without depressing the brake pedal. Depress the gas pedal two times all the way to the floor. Press brake pedal and shift to N.

How do I put my Prius in inspection mode?

How do you keep the 2010 Prius engine running?

See also:   How much mpg does a prius get?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!