People ask also, how do you reset the maintenance light on a Toyota Prius hybrid?
Best answer for this question, how do I put my 2014 Prius into maintenance mode?
Correspondingly, how do I turn off the maintenance required light on my Prius?
- Hold in the brake and press the start until the car turns on.
- Continue to hold in the ODO while turning car off and on with START while foot on brake.
- The maintenance required light will be out.
Furthermore, how do you reset the maintenance required light on a 2008 Toyota Prius?
Contents
What does Prius maintenance mode do?
Putting your Toyota Prius into maintenance mode – getting the engine to stay running. … Normally the engine only runs to either warm itself up or if the driver is requesting more power, but if you want the engine to idle you’re stuck.
What does maintenance required light mean on Toyota Prius?
The “Maintenance Required” light will illuminate on your Toyota Prius after 5,000 miles of traveling since the last time the light has been reset. This notification tells you that you are due for an oil change.
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How do I turn off the maintenance required light?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.
How do you reset the maintenance light on a 2014 Toyota Corolla?
How do you reset the maintenance light on a 2009 Toyota Prius?
To reset your prius simply press the power button once to power your prius down. Press and hold down the odo button and press the power button twice (2x) with your foot off the brake.
How do you reset the code on a 2008 Prius?
Hold down your car brake and press the power button to turn the car on. Continue holding down the brake, as you press the odometer trip button. Turn the car off while holding the ODO button and brake. After doing so, turn the car back on one more time while still on brake and ODO.
How do you reset the maintenance light on a 2013 Prius?
How do I get my car out of maintenance mode?
Turn on the car, (or if already on), then turn it off, within 60 seconds perform the following: Turn Ig-ON but not the engine, do this by pressing the Start button twice without depressing the brake pedal. Depress the gas pedal two times all the way to the floor. Press brake pedal and shift to N.