Turn the vehicle completely off. Press and hold the “Trip” button. Continue to hold the “Trip” button while turning the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.
Considering this, how do you reset the maintenance light on a 2012 Prius V?
Amazingly, how do I turn off the maintenance required light on my Toyota Prius?
- Hold in the brake and press the start until the car turns on.
- Continue to hold in the ODO while turning car off and on with START while foot on brake.
- The maintenance required light will be out.
You asked, how do you reset the oil maintenance light on a 2011 Toyota Prius?
Quick Answer, how do you reset the maintenance light on a 2010 Toyota Prius?
Contents
How do you turn off the maintenance required light on a 2006 Toyota Prius?
What does the red triangle mean on a Toyota Prius?
If You happen to see a red triangle light come on at Your dash in Your Toyota Prius that is its version of a standard check engine light. … The red triangle warning light on a toyota prius is the check engine light and should be brought to a dealership, it could range from low oil pressure to something more serious.
How often should you change the oil in a 2011 Prius?
Recommended Oil Change Intervals for Toyota Vehicles However, as engine technology has advanced and grew more efficient, this is no longer the case. Toyota recommends that customers change the oil in their vehicle, or have it changed for them by a professional every 6 months or 5,000 miles, whichever comes first.
How do you reset the maintenance light on a 2014 Prius?
How often should you change the oil in a 2010 Prius?
Use the Time Estimate For example, the 2010 Toyota Prius has a recommended oil interval of one year or 10,000 miles — whichever comes first.
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How do you reset the maintenance light on a Toyota?
Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out. Once off, release the odometer button and start the car.