Turn the ignition “off” to reset the oil light by pressing the start button without touching the brake and holding the mph km / h button. Keep holding the mph km / h button while the reset is going on and until the reset is complete.
In this regard, how do you reset the oil light on a Toyota Prius? Turn the vehicle completely off. Press and hold the “Trip” button. Continue to hold the “Trip” button while turning the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.
Similarly, how do I reset my 2010 Prius?
Amazingly, how do you reset the oil light on a 2011 Toyota Prius?
Additionally, how do you reset the oil light on a 2009 Toyota Prius?
Contents
What oil does a 2010 Prius take?
The 2010 Toyota Prius oil type and capacity is 0w-20 and 4.4 quarts. Having high quality oil is important for the engine to run smoothly.
How often should you change the oil in a 2010 Prius?
Use the Time Estimate For example, the 2010 Toyota Prius has a recommended oil interval of one year or 10,000 miles — whichever comes first.
How do I know if my Prius battery is bad?
- A decrease in fuel economy.
- Fluctuations in the state of charge.
- The battery’s not holding a charge.
- The internal combustion system runs more than it should.
- Strange engine noises.
How often should you change the oil in a 2011 Prius?
Recommended Oil Change Intervals for Toyota Vehicles However, as engine technology has advanced and grew more efficient, this is no longer the case. Toyota recommends that customers change the oil in their vehicle, or have it changed for them by a professional every 6 months or 5,000 miles, whichever comes first.
How do you reset the maintenance light on a 2013 Prius?
How do you reset the maintenance light on a 2008 Toyota Prius?
Why is my maint reqd light on?
The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. … Most often this just means your vehicle might be due for an oil change.
How do you reset the maintenance light on a 2015 Prius?
How do you reset the oil light?
Insert the key into the ignition and turn it to the “on” position without starting the engine. Press the the gas pedal slowly to the floor three successive times within 10 seconds. Turning the ignition off. If the light is still on the next time you start the truck, repeat the process.
How much oil does my car need 2010 Prius?
The 2010 Toyota Prius has an engine oil capacity of 4.4 qt with a filter change. Toyota recommends using Toyota Genuine Motor Oil.