Additionally, how do I turn off the maintenance required light on my Toyota Prius?
- Hold in the brake and press the start until the car turns on.
- Continue to hold in the ODO while turning car off and on with START while foot on brake.
- The maintenance required light will be out.
Correspondingly, how do I reset my 2007 Prius?
- Disconnect battery cables, first negative, then positive.
- Cover and protect the battery posts!
- Turn ignition to position II.
- Connect both battery cables (“SHORT”) for at least 10 minutes.
- Wait 10 minutes – then ignition off, key out.
- Reconnect battery positive, then negative.
- OBC says “PPPP”, reset time.
As many you asked, how do you reset the maintenance light on a 2008 Toyota Prius?
Similarly, what does the red triangle mean on a Toyota Prius? If You happen to see a red triangle light come on at Your dash in Your Toyota Prius that is its version of a standard check engine light. … The red triangle warning light on a toyota prius is the check engine light and should be brought to a dealership, it could range from low oil pressure to something more serious.
Contents
How do I reset my Prius?
Turn the vehicle completely off. Press and hold the “Trip” or “MPH” button. Continue to hold the “Trip” or “MPH” button while switching the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.
How do I reset my Prius battery?
Try pulling over and turning the car off for a few minutes to reset it. If the hybrid check light comes on while you’re driving, pull over somewhere safe. Turn off your car and let it sit for 5-10 minutes. Then, try starting it back up again to reset it.
How do you reset the code on a Prius?
- Connect the scan tool to the onboard diagnostic connector. This is found under the steering column.
- Press the READ button on the scan tool, and look for any error codes.
- Press the ERASE button on the tool to remove the error code. The check engine light will then turn off.
How do you reset the maintenance light on a 2009 Toyota Prius?
Power off the car. 2) Push and hold down the ODM/TRIP button under the MFD , while holding that down slowly push the POWER button twice. Continue holding down the ODM/TRIP button and look at the odometer. It should flash and then display “——” in place of your milage.
How do you turn off the maintenance required light on a 2006 Toyota Prius?
How do you reset the maintenance light on a 2010 Toyota Prius?
What is the problem with Toyota Prius?
Toyota Prius problem counts by year These are the most common problems reported by owners on platforms such as carproblems.com, carcomplaints.com, and Car Talk Community. They include headlights malfunctioning, excessive oil consumption, and dashboard displays cutting out.
How do you reset the red triangle light on a Prius?
To reset the red triangle warning light on a toyota prius, you can disconnect the battery and reconnect it.
How do I know if my Prius battery is bad?
- A decrease in fuel economy.
- Fluctuations in the state of charge.
- The battery’s not holding a charge.
- The internal combustion system runs more than it should.
- Strange engine noises.
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.