How to get rid of maintenance required light on toyota Rav4?

Put your key in the ignition and turn it to position one, which is the position right before starting the car. Push and hold the trip meter reset button on the dashboard, then turn the key to position two. Keep holding the odometer button for 10 seconds. The light should then flash, beep, and then go out.

Furthermore, how do you reset the maintenance light on a Toyota Rav4 2019?

1. Put your key in the RAV4‘s ignition.
2. Push and hold the trip meter reset button on the dashboard.
3. Hold the odometer button for ten seconds.
4. Once the light goes out, release the odometer button and start the car.

People also ask, how do you reset the maintenance required light on a 2012 Toyota Rav4?

1. Turn on your car without starting.
2. Make sure you are on TRIP A screen.
3. Switch off the ignition.
4. Hold down the ODO/TRIP button while turning the car back on.
5. Keep holding it until you see zero and you’re done.

Also know, how do you reset the maintenance light on a Toyota Rav4 2020?

You asked, how do you reset the maintenance required light on a Toyota? Push and hold the trip meter reset button on the dashboard, then turn your key to the second position. Continue to hold the odometer button for 10 seconds total. This should cause the light to flash, possibly beep, then turn off. After it’s off, release the odometer button then start the car.Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.

How do you turn off the maintenance required light on a Toyota Corolla?

1. Use your keys to turn the key to the “On” position in your Toyota Corolla, but don’t start the car.
2. Locate and press and hold the “trip reset” button on the odometer.
3. Then, turn the key back to “Off.”

How do you turn off the maintenance required light on a 2015 Toyota Rav4?

How do you turn off the maintenance required light on a Toyota Rav4 2021?

How do you get rid of the maintenance required light?

1. Turn ignition switch to the ON position.
2. Set the Odometer/Trip Display to TRIP A mode.
3. Turn the ignition switch to the OFF position.
4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
5. The Service Maintenance Reminder Light will.

What does it mean when my Toyota Rav4 says maintenance required?

The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.

How do you reset the maintenance light on a 2017 Rav4?

How do you turn off the maintenance required light on a Toyota Tacoma?

Turn the vehicle completely off. Press and hold the “Odo/Trip” button. Continue to hold the “Odo/Trip” button while switching the ignition to “On” without starting the engine. Release the “Trip” button until the trip meter is set to all zeros.

How do you turn off the maintenance required light on a Toyota Tundra?

1. Turn your key to the “On” notch, and press your trip odometer knob until “Trip A” is displayed.
2. Turn your key to the “Off” notch. Press and hold the trip odometer knob.
3. Wait for the system to reset.
4. Release the trip odometer knob when “Trip A” is displayed again.

How do you turn off the maintenance required light on a Toyota Camry 2018?

1. Turn on your car position without starting the engine. If your vehicle has an ignition button, press the START/STOP button twice without step on the brake.
2. Go to the ⚙️ Settings.
3. Find the VEHICLE SETTINGS.
4. Press OK button.
5. Select SCHEDULED MAINTENANCE.
6. Select YES.

How do you turn off the maintenance required light on a Toyota Corolla 2018?