Put your key in the ignition and turn it to position one, which is the position right before starting the car. Push and hold the trip meter reset button on the dashboard, then turn the key to position two. Keep holding the odometer button for 10 seconds. The light should then flash, beep, and then go out.
Amazingly, how do you reset the maintenance required light on a Toyota Rav4?
- Press the Left or Right Arrow on the Steering Wheel to Navigate Settings.
- Select the Gear Icon on the Multi-Information Display.
- Press the Up or Down Arrow and Select Vehicle Settings.
- Press the Up or Down Arrow and Select Scheduled Maintenance.
Frequent question, how do you reset the maintenance required light on a 2015 Toyota Rav4? To reset the maintenance light on a 2015 toyota Rav4, first turn the ignition to on, then set the odometer to read “odo”. Turn ignition to off. Push and hold the trip reset button at the same time turning the ignition back to on.
Moreover, how do you reset the maintenance required light on a 2016 Toyota Rav4?
Additionally, how do you turn off the maintenance required light on a Toyota Rav4 2020?
The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.Contents
How do you reset the maintenance required light on a 2012 Toyota Rav4?
- Turn on your car without starting.
- Make sure you are on TRIP A screen.
- Switch off the ignition.
- Hold down the ODO/TRIP button while turning the car back on.
- Keep holding it until you see zero and you’re done.
How do you reset the maintenance light on a 2014 Toyota Rav4?
How do you reset the maintenance light on a 2013 Toyota Rav4?
How do you reset the maintenance light on a Toyota RAV4 2021?
How do you reset the maintenance required light on a Toyota RAV4 2018?
To reset the maintenance light on a 2018 toyota rav 4: insert the key into the ignition. Press and hold the trip meter reset button. Turn the engine switch to the “on” position. Hold the trip meter reset button until the trip meter displays “000000.” The maintenance light is reset.
How do I turn off the maintenance required light?
- Turn ignition switch to the ON position.
- Set the Odometer/Trip Display to TRIP A mode.
- Turn the ignition switch to the OFF position.
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
- The Service Maintenance Reminder Light will.
What does it mean when my car says maint reqd?
What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.
What does the maint reqd light mean?
What Is the Maintenance Required Light? The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop.
How long can you go without an oil change?
Cars can generally go 5,000 to 7,500 miles before needing an oil change. Furthermore, if your vehicle uses synthetic oil, you can drive 10,000 or even 15,000 miles between oil changes. Continue reading to learn more about oil changes or skip to scheduling your oil change right here on our website.