Also, how do you reset the maintenance light on a 2015 Toyota Rav4? To reset the maintenance light on a 2015 toyota Rav4, first turn the ignition to on, then set the odometer to read “odo”. Turn ignition to off. Push and hold the trip reset button at the same time turning the ignition back to on.
Quick Answer, how do I turn off the maintenance required light on my Toyota Rav4? Put your key in the ignition and turn it to position one, which is the position right before starting the car. Push and hold the trip meter reset button on the dashboard, then turn the key to position two. Keep holding the odometer button for 10 seconds. The light should then flash, beep, and then go out.
You asked, how do I turn off the maintenance light in my Toyota? Push and hold the trip meter reset button on the dashboard, then turn your key to the second position. Continue to hold the odometer button for 10 seconds total. This should cause the light to flash, possibly beep, then turn off. After it’s off, release the odometer button then start the car.
Also know, what does it mean when my Toyota Rav4 says maintenance required? The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.
Contents
What is maint required light on Toyota?
The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.
How do you reset the maintenance light on a Toyota Rav4 2019?
How do you reset the maintenance light on a 2017 Rav4?
How do you reset the maintenance required light on a 2013 Toyota Rav4?
How do you reset the maintenance required light on a 2012 Toyota Rav4?
- Turn on your car without starting.
- Make sure you are on TRIP A screen.
- Switch off the ignition.
- Hold down the ODO/TRIP button while turning the car back on.
- Keep holding it until you see zero and you’re done.
How do you reset the maintenance light on a Toyota Rav4 2018?
To reset the maintenance light on a 2018 toyota rav 4: insert the key into the ignition. Press and hold the trip meter reset button. Turn the engine switch to the “on” position. Hold the trip meter reset button until the trip meter displays “000000.” The maintenance light is reset.
How do you reset the maintenance light on a Toyota Rav4 2021?
How do you reset the maintenance required light on a 2010 Toyota Rav4?
How do I reset my Toyota Rav4?
