Put your key in the ignition and turn it to position one, which is the position right before starting the car. Push and hold the trip meter reset button on the dashboard, then turn the key to position two. Keep holding the odometer button for 10 seconds. The light should then flash, beep, and then go out.
Additionally, how do you turn off the maintenance light on a Toyota Rav4 push button start 2021?
Also know, how do you reset the maintenance light on a 2015 Toyota Rav4? To reset the maintenance light on a 2015 toyota Rav4, first turn the ignition to on, then set the odometer to read “odo”. Turn ignition to off. Push and hold the trip reset button at the same time turning the ignition back to on.
Also the question is, how do you turn off the maintenance required light on a Toyota RAV4 2020?
You asked, how do you reset the maintenance light on a Toyota RAV4 2020?
Contents
How do you reset the maintenance light on a Toyota Rav4 2018?
To reset the maintenance light on a 2018 toyota rav 4: insert the key into the ignition. Press and hold the trip meter reset button. Turn the engine switch to the “on” position. Hold the trip meter reset button until the trip meter displays “000000.” The maintenance light is reset.
How do you reset the maintenance light on a 2012 Toyota Rav4?
- Turn on your car without starting.
- Make sure you are on TRIP A screen.
- Switch off the ignition.
- Hold down the ODO/TRIP button while turning the car back on.
- Keep holding it until you see zero and you’re done.
How do I turn off the maintenance required light?
- Turn ignition switch to the ON position.
- Set the Odometer/Trip Display to TRIP A mode.
- Turn the ignition switch to the OFF position.
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
- The Service Maintenance Reminder Light will.
How do you turn off the maintenance required light on a Toyota RAV4 2019?
- Put your key in the RAV4’s ignition.
- Push and hold the trip meter reset button on the dashboard.
- Hold the odometer button for ten seconds.
- Once the light goes out, release the odometer button and start the car.
How do you reset the maintenance light on a 2010 Toyota Rav4?
How do I turn off the maintenance light in my Toyota?
- Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
- Turn the Vehicle Off and Press the Trip Meter Reset Button.
- Turn the Vehicle Back on.
- Keep the Reset Button Pressed.
- Release the Reset Button.
Why is my maintenance required light on Toyota Rav4?
The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.
Why does my Toyota maintenance light keep requiring maintenance?
What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.
How do you reset the maintenance light on a 2009 Toyota Rav4?
How do you reset the maintenance light on a Toyota 2020?
